Filter traffic in Autovpn

SOLVED
Max70
Conversationalist

Filter traffic in Autovpn

Once estabilshed an autovpn network is it possible to filter traffic? For example I want let communicate voice vlan only to other voice vlan and on sip port of the other network or filter traffic so clients can connect to domain controllers only on necessary ports 

Is it possible ?

I tried with outbound rules of vpn or firewall layer 3 but it's not working

Just to explain the network schema I have a network with 5 vlan. My MX has 1 only ip address and it can see the other vlan with a static routing to internal default gateway

 

Thanks

 

 

1 ACCEPTED SOLUTION
BrechtSchamp
Kind of a big deal

Yes it is, it's the outbound rules in Security & SD-WAN > Configure > Site-to-site VPN. Don't use the inbound rules, they've been added by accident.

 

More info here:

https://documentation.meraki.com/MX/Site-to-site_VPN/Site-to-site_VPN_Firewall_Rule_Behavior

View solution in original post

1 REPLY 1
BrechtSchamp
Kind of a big deal

Yes it is, it's the outbound rules in Security & SD-WAN > Configure > Site-to-site VPN. Don't use the inbound rules, they've been added by accident.

 

More info here:

https://documentation.meraki.com/MX/Site-to-site_VPN/Site-to-site_VPN_Firewall_Rule_Behavior

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels