I created a new network and cloned it from an existing network. I need to change the IP addresses on the new network from the ones that were created when it cloned the other network. (These vlans are on the MX).
However, when I try to change a vlan IP address, I get the error message:
There were errors in saving this configuration:
The IP address range 10.1.1.0/24 does not apply to any configured local or VPN subnets.
10.1.1.0/24 is in the network that was cloned. I'm trying to change it to 10.2.1.0/24.
I can't delete the subnet either, it gives me the same error message. Is there a way I can change the vlan IP information? I've opened a ticket with support, in the meantime, I wanted to see if anyone has come across this issue and what remediation steps were used.