Error Policy must be '0' or '1' when configuring port forwarding rule

[francktls]

Hi Community,

Got an error that I never seen before when I'm configuring a port forwarding rule on a MX.

Simple rule :

Description : voice

Uplink : Internet2

Protocol : TCP

Public Port : 11443

LAN IP : 172.20.100.4

Local port : 443

Allowed remote IPs : Any

Error :

There were errors in saving this configuration:

• Policy must be '0' or '1'

I don't use policies in this org...

Somebody has an idea ?

Many thanks,

Franck.

[alemabrahao]

Are you trying to create port forwarding rule? The configuration looks fine. Are you configuring another rule (such as the L3 rule) at the same time?

[alemabrahao]

Also, can you show the firewall configuration page?

[francktls]

of course, nothing interesting...

[alemabrahao]

Well, It looks like a bug, so my suggestion is to open a support case.

[Ryan_Miles]

On the traffic shaping page do you have any flow preferences or uplink selection rules set? 

[JonM18]

Ran into the same issue. Having a flow preference on the same subnet was causing the issue. Had to remove the flow preference to resolve.

@Ryan_Miles The "Policy must be '0' or '1'" error text could be improved! 🙂