Downlink port of Meraki MX use as WAN connection MPLS

AYEN
Getting noticed

Downlink port of Meraki MX use as WAN connection MPLS

Hi Everyone,

 

    I have current client has 2 MPLS connection and 2 ISP connection (4 WAN link totally) and they have 2 MX105 so they want to utilize the all 4 public IP in 1 MX105 and also to other MX105 as redundant for the WAN connection. But the challenge is the MX has only 2 WAN connection limitation right? So the other work around that they propose if possible to MX to use the downlink port as MPLS or ISP connection and do some routing if the 2 dedicated WAN uplink failed the downlink will activate. 

 

Thank you in advance.

2 Replies 2
cmr
Kind of a big deal
Kind of a big deal

We have a similar setup, but we have two firewall pairs, one on the internet connections and another in concentrator mode to terminate all the VPNs.  The MPLS circuits don't have direct internet access so terminate on a L3 switch with the firewalls all connected to that.

If my answer solves your problem please click Accept as Solution so others can benefit from it.
BlakeRichardson
Kind of a big deal
Kind of a big deal

@CarolineS this is in the wrong category. 

 

Edit - has been moved now. 

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels