Cloud Services

SOLVED
kami
Here to help

Cloud Services

In case the Meraki cloud services are out of services. Will this have any kind of effect on a local network?

How will the configuration changes synchronize to other networks?

1 ACCEPTED SOLUTION
BrandonS
Kind of a big deal

This explains: https://meraki.cisco.com/trust#oob

 

What happens if my network loses connectivity to the Cisco Meraki cloud?

Because of the Cisco Meraki out of band architecture, most end users are not affected if Cisco Meraki wireless APs, switches or security appliances cannot communicate with Cisco Meraki cloud services (e.g., because of a temporary WAN failure):

  • Users can access the local network (printers, file shares, etc.)
  • If WAN connectivity is available, users can access the Internet
  • Network policies (firewall rules, QoS, etc.) continue to be enforced
  • Users can authenticate via 802.1X/RADIUS
  • Wireless users can roam between access points
  • Users can initiate and renew DHCP leases
  • Established VPN tunnels continue to operate
  • Local configuration tools are available (e.g., device IP configuration)

While the Cisco Meraki cloud is unreachable, management, monitoring, and hosted services are temporarily unavailable:

  • Configuration and diagnostic tools are unavailable
  • Usage statistics are stored locally until the connection to the cloud is re-established, at which time they are pushed to the cloud
  • Splash pages and related functionality are unavailable
- Ex community all-star (⌐⊙_⊙)

View solution in original post

4 REPLIES 4
BrandonS
Kind of a big deal

This explains: https://meraki.cisco.com/trust#oob

 

What happens if my network loses connectivity to the Cisco Meraki cloud?

Because of the Cisco Meraki out of band architecture, most end users are not affected if Cisco Meraki wireless APs, switches or security appliances cannot communicate with Cisco Meraki cloud services (e.g., because of a temporary WAN failure):

  • Users can access the local network (printers, file shares, etc.)
  • If WAN connectivity is available, users can access the Internet
  • Network policies (firewall rules, QoS, etc.) continue to be enforced
  • Users can authenticate via 802.1X/RADIUS
  • Wireless users can roam between access points
  • Users can initiate and renew DHCP leases
  • Established VPN tunnels continue to operate
  • Local configuration tools are available (e.g., device IP configuration)

While the Cisco Meraki cloud is unreachable, management, monitoring, and hosted services are temporarily unavailable:

  • Configuration and diagnostic tools are unavailable
  • Usage statistics are stored locally until the connection to the cloud is re-established, at which time they are pushed to the cloud
  • Splash pages and related functionality are unavailable
- Ex community all-star (⌐⊙_⊙)
GuilhermeMacedo
Getting noticed

Hi @kami

 

Cisco Meraki uses cloud based management to mantain your gears, if the cloud was unable or not, the Meraki gears (MX, MS, MX, MV and SM) still working as well as previusly configured but dont send consume or client informations live.

 

All of Meraki solutions are able to save the metadata of your devices in itself and other information that will resend when dashboard are online again.

 

Unfortunely when you do not have connection with dashboard or your gears not connected to the internet, you are not able to change or modify the Meraki gears configurations.

 

Hope this helps

 

Nick
Head in the Cloud

Any changes you make to the configuration will only sync once the devices regain access to the cloud. Either through the Meraki cloud being bought back online (it would have to go offline first) or far more likely the internet connectivity being bought back online where the devices are located.
vonyp
New here

em, thats a poor answer and doesnt address the question, sorry, even though i appreciate its out of date. 

 

In the event of cloud connectivity loss (which is most commonly caused by a local ISP or connection failure), the Meraki hardware device will continue to run with its last known configuration until cloud connectivity is restored.

 

Meraki Cloud Architecture - Cisco Meraki

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels