I have 20 remote locations and need to set up a separate VPN for the printers and other misc equipment at them. Can a MX have multiple Meraki VPN's on them or is this a case of needing a 2nd MX? I know I can setup multiple non-Meraki VPN's, but it's not looking like I can configure a 2nd Meraki VPN to these devices
Nevermind I just solved it using a different idea. Pretty much I was asked if I could run two Tunnels using the same endpoints. Given our operation and simple network design it didn't make much sense to me need wise, but was curious if it was possible none the less. Best I can tell you need a second hub and then you can split the traffic from the remote site to whichever hub you wish to use. I'm about to call it a day so I've not actually tried it yet, and I may not since I'm likely not going to need to do it.