ECMS practice question - May 7th

[SandroZ]

Comment below with what you think is the correct answer and remember: if you like the question or the ECMS questions initiative, leave a kudo.

See you in a week with the correct answer!

ECMS practice question

Which of the following operations involving an MR access point can only be performed on the local status page of the device?

1. Change the login credential for the local status page
2. Enable survey mode for the access point
3. Assign a static IP to the access point
4. Statically configure the channel for the 2.4 GHz radio

P.S. We will be sharing new practice questions weekly! If you'd like to receive updates when we do, click the "ECMS Practice" label below and then "Subscribe”

Here you can find previous questions

[AB_LaDigue67]

B)rexit C)ausing D)isaster

A)s a default credentials can only be changed in dashboard

[DarrenOC]

As @AB_LaDigue67 states- B,C, and D

Take a look see through the below reference document:

https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Me...

[Bruce]

I’d say there is only one answer. B)ecause the other three can be changed within the Dashboard.

[KarstenI]

I go for the same answer as B)ruce ... 😉

[DarrenOC]

Oohhh....going into self doubting mode but sticking to my original answer.

[KarstenI]

Did you realise there is an "only" in the question? 

[AB_LaDigue67]

Oh yes Bruce has a point! But subject to interpretation.  Of the list of 4 options only 3 can be configured in local status page but then yes looks like uniquely Survey mode only ever and not in Dashboard also. To B or not just B that is the question?

[cmr]

I'm going with Bruce instead of UCcert on this one, sorry @DarrenOC!

[DarrenOC]

Never did like the Cisco exam formats and way of questioning.  I’ll admit defeat

[SandroZ · Accepted solution]

The correct answer for last week question was B!
 

If you want to read more about survey mode and how to use it you can take a look here

also as bonus reading how to change le local status page credential