ECMS practice question - May 7th

SOLVED
SandroNardi
Meraki Employee
Meraki Employee

ECMS practice question - May 7th

Comment below with what you think is the correct answer and remember: if you like the question or the ECMS questions initiative, leave a kudo.


See you in a week with the correct answer!

ECMS practice question

 

Which of the following operations involving an MR access point can only be performed on the local status page of the device?

 

  1. Change the login credential for the local status page
  2. Enable survey mode for the access point
  3. Assign a static IP to the access point
  4. Statically configure the channel for the 2.4 GHz radio

 

P.S. We will be sharing new practice questions weekly! If you'd like to receive updates when we do, click the "ECMS Practice" label below and then "Subscribe”

Here you can find previous questions

~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

The Meraki ECMS exam is now live! Test your knowledge of Meraki and become an official Cisco Meraki Solutions Specialist. More info on the ECMS exam found here.

For information regarding all of Meraki's training offerings, be sure to check out the Meraki Learning Hub.
1 ACCEPTED SOLUTION
SandroNardi
Meraki Employee
Meraki Employee

The correct answer for last week question was B!
 

If you want to read more about survey mode and how to use it you can take a look here

 

also as bonus reading how to change le local status page credential

~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

The Meraki ECMS exam is now live! Test your knowledge of Meraki and become an official Cisco Meraki Solutions Specialist. More info on the ECMS exam found here.

For information regarding all of Meraki's training offerings, be sure to check out the Meraki Learning Hub.

View solution in original post

10 REPLIES 10
AB_LaDigue67
Getting noticed

B)rexit C)ausing D)isaster

A)s a default credentials can only be changed in dashboard

DarrenOC
Kind of a big deal
Kind of a big deal

As @AB_LaDigue67 states- B,C, and D

 

Take a look see through the below reference document:

 

https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Me...

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Bruce
Kind of a big deal

I’d say there is only one answer. B)ecause the other three can be changed within the Dashboard.

KarstenI
Kind of a big deal
Kind of a big deal

I go for the same answer as B)ruce ... 😉

DarrenOC
Kind of a big deal
Kind of a big deal

Oohhh....going into self doubting mode but sticking to my original answer.

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
KarstenI
Kind of a big deal
Kind of a big deal

Did you realise there is an "only" in the question? 

Oh yes Bruce has a point! But subject to interpretation.  Of the list of 4 options only 3 can be configured in local status page but then yes looks like uniquely Survey mode only ever and not in Dashboard also. To B or not just B that is the question?

cmr
Kind of a big deal
Kind of a big deal

I'm going with Bruce instead of UCcert on this one, sorry @DarrenOC!

DarrenOC
Kind of a big deal
Kind of a big deal

Never did like the Cisco exam formats and way of questioning.  I’ll admit defeat

 

UCcert_1-1620486896438.png

 

 

 

 

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
SandroNardi
Meraki Employee
Meraki Employee

The correct answer for last week question was B!
 

If you want to read more about survey mode and how to use it you can take a look here

 

also as bonus reading how to change le local status page credential

~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

The Meraki ECMS exam is now live! Test your knowledge of Meraki and become an official Cisco Meraki Solutions Specialist. More info on the ECMS exam found here.

For information regarding all of Meraki's training offerings, be sure to check out the Meraki Learning Hub.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.