Can I assign a Public IP to a specific VLAN?

[ITGuyInTraining]

Hi everyone, 

I'm very new to infrastructure, networking and using Meraki, and this is my first post so be gentle!

We are a company that supplies shared spaces and keep everything separate by setting up ports and WLANs for clients using Group Policies and separate VLANs, but I've just had a request from a client for their own public IP.  

I have an address to give out but can this be assigned to a VLAN in the Dashboard?

Many thanks!

[ww]

Look if 1:1 nat is enough for your use case

https://documentation.meraki.com/MX/NAT_and_Port_Forwarding/Port_Forwarding_and_NAT_Rules_on_the_MX#...

If you really want to route a public subnet then you can use this

https://documentation.meraki.com/MX/Networks_and_Routing/NAT_Exceptions-No_NAT_on_MX_Security_Applia...

[cmr]

@ww, I think @ITGuyInTraining wants one LAN subnet to use a separate WAN IP address.  This is a commonly configurable feature in many firewalls usually known as outbound NAT or interface PAT.  Unfortunately on the MXs there is no option to configure either of those within a single uplink.