Lab Setup for Demo

MAzad
Conversationalist

Lab Setup for Demo

Hi

We are setting up a lab for demo purposes for potential customers. We have got the following equipment:

2 MXs

2 Switches

2 APs

1 Camera

 

What would you suggest to be the best setup of these devices to cover various scenarios ? Something that would allow to showcase as many capabilities/different customer requirements as possible?

If we try to simulate one branch site and one DC site, is the recommended design to have MX in NAT mode in branch site and one-arm-concentrator mode at the DC site?

 

Thanks,

Mariam

2 REPLIES 2
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @MAzad ,

 

Why not take a look at Cisco dcloud - https://dcloud.cisco.com

 

They have all this pre-built and ready for you to demo to your customers.  

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
MAzad
Conversationalist

Thanks UCcert for this info. The lab will also be used for testing different scenarios as we deploy solutions for customers in future which is why we went with a dedicated lab. 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.