Viable design with two MX appliances.

SOLVED
mcgruff
Conversationalist

Viable design with two MX appliances.

Is the following design viable? (Sorry if the diagram looks a little dumb, I'm not really a network guy..)

 

 

Untitled Diagram.png

 

1 ACCEPTED SOLUTION

ust be aware what kind of traffic u will send over one default route to MX1 and MX2, maybe would it be a policy route in your L3 device that interconects both MXs

View solution in original post

3 REPLIES 3
Johnfnadez
Getting noticed

Will u use both MX as active-active right?

I should work fine! if the both are in active active.

Yes, both will be active. Thanks for your input!

 

ust be aware what kind of traffic u will send over one default route to MX1 and MX2, maybe would it be a policy route in your L3 device that interconects both MXs

View solution in original post

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.