@PhilipDAth As far as I know the list of supported Switches in the doc is accurate today. There are plans to bring more functionality to the C9300-M. Not sure if it will come to the MS130 family.
As for how SecurePort looks in dashboard. When a switchport has successfully authenticated a Meraki AP it will show a Wi-Fi bars icon on the port. If it fails to auth the AP the port still shows the Wi-Fi icon, but the port would be red. I don't recall if there's a state in which it would be amber. I'm not finding any failing ports in my searching to confirm.
![Screenshot 2024-06-19 at 07.16.15.png Screenshot 2024-06-19 at 07.16.15.png](https://community.meraki.com/t5/image/serverpage/image-id/37940iB1AFB540703E9D3E/image-size/large?v=v2&px=999)
Clicking on the switchport will show you that it's been authenticated by a SecurePort profile.
![Screenshot 2024-06-19 at 07.16.31.png Screenshot 2024-06-19 at 07.16.31.png](https://community.meraki.com/t5/image/serverpage/image-id/37942iFEF983193DAF4E8F/image-size/large?v=v2&px=999)
And clicking on the config comparisons link will show more detail.
![Screenshot 2024-06-19 at 07.16.44.png Screenshot 2024-06-19 at 07.16.44.png](https://community.meraki.com/t5/image/serverpage/image-id/37943iA5A4903781754C88/image-size/large?v=v2&px=999)
I agree with you that adding screenshots like this to the doc might be helpful. Thanks for the suggestion. I'll forward it along to the doc folks.
Ryan / Meraki Solutions Engineer If you found this post helpful, please give it
Kudos. If my answer solves your problem please click
Accept as Solution so others can benefit from it.