Ping test response data issue

Adrian4
Head in the Cloud

Ping test response data issue

Hello,

I am working on a script that will perform a ping test between every site/network in our organisation and return the results.

ping_result_response = requests.get(f"{MERAKI_API_URL}{ping_result_url}", headers=headers,
verify=f"{root_path}/Cisco Umbrella Root CA.crt")
ping_result_json = ping_result_response.json()
if ping_result_json['status'] == 'complete':
ping_result_json = ping_result_response.json()
print(ping_result_json)



However after I do the GET request I don't seem to get teh full results. This is an example

{'pingId': '000000000000000', 'url': '/devices/0000-0000-0000/liveTools/ping/00000000000000', 'request': {'serial': '0000-0000-0000', 'target': '111.111.111.111', 'count': '3'}, 'status': 'complete', 'results': {'sent': 3, 'received': 3, 'loss': {'percentage': 0}}}


The results cut off without displaying the "latencies" or "replies" key/dictionary 

Adrian4_0-1678201976983.png

https://developer.cisco.com/meraki/api-v1/#!get-device-live-tools-ping

Any ideas what the problem is? 

 

3 Replies 3
Adrian4
Head in the Cloud

Just noticed - only some of the ping results are incomplete. Many return the full data but some only return up to "results" and miss "latencies" etc 

 

It seems the pings where data is missing all involve pings to or from 1 particular site.

Adrian4
Head in the Cloud

I ran the ping ID of the odd sites pings manually through the meraki api dashboard and sure enough, the api is not returning the data 😛

all im getting is 

{
"pingId": "111111111111111111111111",
"url": "/devices/1111-1111-1111/liveTools/ping/111111111111111111111111",
"request": {
"serial": "1111-1111-1111",
"target": "000.000.000.000",
"count": "3"
},
"status": "complete",
"results": {
"sent": 3,
"received": 3,
"loss": { "percentage": 0 }
}
}


If the status is complete and the pings were successful, why is there no latency data?

shwetaP
Meraki Employee
Meraki Employee

Hi @Adrian4, are you still seeing similar behavior?
The issue should be resolved now but please do check on your side.

Thanks

Get notified when there are additional replies to this discussion.