Check/Update firmware via API

SOLVED
Pettho
Conversationalist

Check/Update firmware via API

I'm trying to check my firmware to see if there is any updates via API, but when I try the GET Request: https://api.meraki.com/api/v1/networks/L_595xxxxxxxxx99/firmwareUpgrades

it responds with 400 Bad Request:

{
"errors": [
"Multiple values exist for the upgradeWindow"
]
}

 

I have several organizations and most of them respond correct, but a few gives me an error.

 

 

1 ACCEPTED SOLUTION
Pettho
Conversationalist

I solved the problem myself 🙂

I changed the time of the upgrade window in Network-wide-> General to another time, and then back again. And the error is gone.

View solution in original post

2 REPLIES 2
Pettho
Conversationalist

I solved the problem myself 🙂

I changed the time of the upgrade window in Network-wide-> General to another time, and then back again. And the error is gone.

John-K
Meraki Employee

Splitting the combined network and recombining the split networks will also accomplish this.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.