Check/Update firmware via API

SOLVED
Pettho
Conversationalist

Check/Update firmware via API

I'm trying to check my firmware to see if there is any updates via API, but when I try the GET Request: https://api.meraki.com/api/v1/networks/L_595xxxxxxxxx99/firmwareUpgrades

it responds with 400 Bad Request:

{
"errors": [
"Multiple values exist for the upgradeWindow"
]
}

 

I have several organizations and most of them respond correct, but a few gives me an error.

 

 

1 ACCEPTED SOLUTION
Pettho
Conversationalist

I solved the problem myself 🙂

I changed the time of the upgrade window in Network-wide-> General to another time, and then back again. And the error is gone.

View solution in original post

2 REPLIES 2
Pettho
Conversationalist

I solved the problem myself 🙂

I changed the time of the upgrade window in Network-wide-> General to another time, and then back again. And the error is gone.

John-K
Meraki Employee
Meraki Employee

Splitting the combined network and recombining the split networks will also accomplish this.

Get notified when there are additional replies to this discussion.