API - VPN Full-Tunnel Exclusion

[MattZo]

Hello,

Does anyone know if it is possible to add/update/remove VPN full-tunnel exclusions for networks or templates via the API?

The API docs are either very unclear, or available properties for the get/post/put methods are extremely limited...

E.g. I can only see "timeZone" for updateOrganizationConfigTemplate in the docs.

I feel like I must be missing something.

Many thanks.

[ww]

Most api calls  should work if you send them to the template network id. But i have not seen a api for exclusions yet.

[RomanMD]

Maybe I've not understood you correctly, but for site-2-site vpn you can either have a default route checked if your MX is in Spoke mode or Exit Hub if it is in Hub mode. 

If that is what you are trying to accomplish then the /networks/{networkId}/appliance/vpn/siteToSiteVpn should help you do the changes.

[Inderdeep]

@MattZo : No API calls for that.

[sretlaw]

I am also very interested in this. Is there a roadmap for an endpoint that would allow this? I need to add lots of vpn exclusions / local breakout IPs to more than 3000 appliances.

[DKCisco]

I ended up making a python script for this in the new gui. Using some selenium, pyautogui, and openpyxl. I'll post the generic code on GitHub and link it here.

github.com/DKCisco/-Python_Cisco_Meraki_VPN_Exclusion

[odmv]

This is also something we need badly.

[DKCisco]

I ended up making a python script for this in the new gui. Using some selenium, pyautogui, and openpyxl. I'll post the generic code on GitHub and link it here.

github.com/DKCisco/-Python_Cisco_Meraki_VPN_Exclusion

[DKCisco]

I'm also wanting this, I'm having to add zoom IP's for split tunneling (vpn exclusion list) and there are many IP addresses.

[DKCisco]

I ended up making a python script for this in the new gui. Using some selenium, pyautogui, and openpyxl. I'll post the generic code on GitHub and link it here.

[DKCisco]

https://github.com/DKCisco/-Python_Cisco_Meraki_VPN_Exclusion/blob/main/generic-fillLocalInternetBre...

[DKCisco]

I ended up making a python script for this in the new gui. Using some selenium, pyautogui, and openpyxl. I'll post the generic code on GitHub and link it here.

https://github.com/DKCisco/-Python_Cisco_Meraki_VPN_Exclusion