8021x access policy radius server API

[MattG1]

On Meraki Z and MX series appliances I need to change the Access Policy on the individual LAN ports.  When using the web interface after you change the policy to 802.1x, the UI changes and allows you to add your Radius Server(s) and their info.

Thru postman I can change the ports to the 802.1x Access policy however, I can't seem to find the entry point to add / modify the Radius server info.

I don't have a preference as to which version of the API I use.

Here's a link to the PUT for changing the access policy

https://developer.cisco.com/meraki/api-v1/#!update-network-appliance-port

Any idea?

Thanks

Matt

[ww]

Does it show anything when you enabled it on the port and set the server ip.  Then do a get?

[MattG1]

Here is the API url that I am calling:

https://api.meraki.com/api/v1/networks/{networkId}/appliance/ports/4

Access Policy set to Open:

Get Response:

{
"number": 4,
"enabled": true,
"type": "access",
"dropUntaggedTraffic": false,
"vlan": 1,
"accessPolicy": "open"
}

Access Policy set to 802.1x (No Radius server defined):

Get response:

{
"number": 4,
"enabled": true,
"type": "access",
"dropUntaggedTraffic": false,
"vlan": 1,
"accessPolicy": "8021x-radius"
}

Access Policy set to 8021x and a defined Radius server:

Get Response:

{
"number": 4,
"enabled": true,
"type": "access",
"dropUntaggedTraffic": false,
"vlan": 1,
"accessPolicy": "8021x-radius"
}

I don't see a change after adding the Radius server.

Thanks

Matt

[MattG1]

Just as a quick followup as of 8/27/2020, there is currently no support for this functionality.  It's been submitted as a feature request however, there is no ETA.

Thanks all

Matt