Hello,
today I can´t access to the switchports of the switches. Dashboard doesn´t show them.
Anybody here who has the same issue?
Solved! Go to solution.
Hello,
We have been advised that the issue with Switch ports and the summary page has been resolved. Please reach out to Meraki Support if you have any further reports.
Regards,
Meraki Team
Similar problem here, on random sites - some working, some not
I did open an case
So have we
our workaround is to reboot the switches
You are kidding.
It´s an dashboard issue not an switch issue!
I can´t reboot dozends of switches.
Sorry, confirmed the work around didn't work. Is now recognised as a larger problem
No solution?
I can´t change and see any port configuration.
That is not really good.
I'm also having the same issue. I had a user report that they have no network connection, and I can't even run a cable test on the port to see if it's a cable issue. I have opened a case with Support.
Russ
Hey team,
I can confirm there is currently an issue with the Summary and Switch ports view for certain networks/switches. This is currently with our development team for further investigation, please bear with us.
If you haven't already, please open a case via Dashboard, so we can keep you better appraised of the developments.
Many thanks.
Giac
Hello,
We have been advised that the issue with Switch ports and the summary page has been resolved. Please reach out to Meraki Support if you have any further reports.
Regards,
Meraki Team
It's a pitty that the hotline service wasn't informed and didn´t know anything