Creating new network dashboard for existing network

Solved
Karl_Jacobsen
Getting noticed

Creating new network dashboard for existing network

I've been working on cleaning up some aspect of my network. Currently I have one Meraki network dashboard that runs everything. My company has two sites and I would like to diversify the dashboard to have one network dashboard for each site. If I create a new network for the remote site would I copy the configuration from my current site and just add the correct devices from the main site to the new one? Is this process going to impact my networks that are already in production or does this only affect the dashboard?

1 Accepted Solution
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @Karl_Jacobsen 

 

Worth reviewing this one

 

 https://documentation.meraki.com/General_Administration/Inventory_and_Devices/Moving_Devices_between...

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

View solution in original post

3 Replies 3
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @Karl_Jacobsen 

 

Worth reviewing this one

 

 https://documentation.meraki.com/General_Administration/Inventory_and_Devices/Moving_Devices_between...

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
DarrenOC
Kind of a big deal
Kind of a big deal

In a nutshell they’ll be downtime and will require some thought and planning

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Karl_Jacobsen
Getting noticed

Thank you Darren! That article is very helpful.... I decided to setup my remote office network dashboard as a copy of my current dashboard, edit the remote office dashboard to remove the primary office stuff, then try individually moving APs over from the current to the remote. This will minimize the impact on network availability while the AP changes from the current dashboard to the remote. 

Get notified when there are additional replies to this discussion.