Meraki

ConnorL · ‎Nov 7 2024

I'd recommend opening a Support case. Typically snapshot issues are due to: The required port is not allowed upstream - TCP 30001 Requesting the image immediately after the request It can sometimes take 5-10 seconds for the image to actually be downloaded from the MV, so make sure you give a 5-10 second buffer between the snapshot request, and attempting to view the image. Requesting an expired image The MV will only store the last 10 snapshots, requesting an older snapshot will result in an error 400 (like your screenshot)

PhilipDAth · ‎Dec 9 2023

Are you using an MV72 or MV52 family camera? Only those two families can do vehicle detection. https://documentation.meraki.com/MV/Video_Analytics/MV_Object_Detection#Vehicle_Detection

sungod · ‎Aug 7 2023

Don't think there's a single call. You could get a list of cameras and their networks with https://developer.cisco.com/meraki/api-v1/get-organization-devices-statuses/ The broker IDs for a network can be found with https://developer.cisco.com/meraki/api-v1/get-network-mqtt-brokers/ Then iterate through cameras using https://developer.cisco.com/meraki/api-v1/get-device-camera-sense/ and select the broker ID(s) of interest.

Meraki

Community

About Dhakal

Dhakal

Community Record

Badges

Re: Site Can't be Reached on Snapshot

Re: No objects on MQTT raw_detections

Re: Fetch Cameras with Specific MQTT Brokers