Meraki

ToDevNull · ‎Apr 7 2024

In my case, arround 40 MX devices are working with primary access using wired connection on WAN1 interface, but appears yellow anyway 😞 (just because they have a sim card and the ability to switch over the mobile network ?)

ToDevNull · ‎Apr 5 2024

Dear all, I'm using multiple MX68CW devices. All of them having a sim card and they are connected to the mobile network for failover purpose (in addition to the wired internet access). In the dashboard and the map, they appear with yellow status instead of green. We also have some MX68CW without a simcard and they are shown as green. My thinking is that the device should appear in yellow in case of failover (when using the mobile network), not only when the device is connected to the mobile network. Is there is a way to configure that ?

ToDevNull · ‎May 30 2023

Dear all, We are using Meraki MX devices like this : - Use the autoVPN feature to reach local ressources accross our organization - The firewall is not allowing the use of the local Internet access - We would like to allow the MS Update feature by using the Internet access We configured the firewall like the following. Is this kind of filtering needs should be implemented like this ? Is such configuration can allow the MS Update ? Thanks for any help/comment/remarks. Rds,

Meraki

Community

About ToDevNull

ToDevNull

Community Record

Re: Yellow vs green color using cellular

Yellow vs green color using cellular

Firewall using FQDN for MS Update

Yellow vs green color using cellular