Not sure if this has been asked, but we have different RADIUS servers with the same key, but each network has the same SSID name and settings as each other just the RADIUS servers being different per network, when a user goes from one network to another they have to re-connect to the hidden SSID that we have, our public showing SSID is no issues when roaming as this uses Meraki DHCP not our internal DHCP. Any advice on getting it so clients can move across the different networks without having to re-connect to the hidden SSID  ... View more

Hi Not sure if the right forum board, trying to do 802.1x set up wired for our Meraki switches, we have a RADIUS set up, and we are using the same key for 802.1x wired and 802.1x wireless, but the difference is on our network is our hidden wireless SSID gets an IP address from a DHCP scope we have set up on-prem DC, were our visible wireless SSID, uses the Meraki DHCP scope to provide IP addresses. when we use our 802.1x wired currently it is getting an IP address from the on-prem DC DHCP scope for the hidden wireless SSID My thinking is that the 802.1x wired and wireless should use different keys for each 802.1x We either need our visible wireless SSID, needs to have its own on-prem DHCP scope to provide IP address so our visible wifi will instead of getting an IP address from Meraki DHCP would get it from on-prem and then we would point the 802.1x wired to the on-prem visiable wireless DHCP scope. FYI (hidden wifi SSID gets access to internal resources, visible wifi SSID gets out to the internet and no access to internal resources)   Any one have any other ideas   ... View more