so you could get a cisco system used for video confercacing, then you convert the video to anything you want, with video capture card,  or  other,  i meen all protocalls start with H are used for video audio conferaceing and or phones, as the compreshion rate not to be confused with rtsp now here interesting quistion can cisco video confenaceing servrs handle rtsp ,   now from what i understand video trasport dose not happen over rtsp rather this is a seed to send it along another protocall,    so in short device must support bouth or will fail,  also u need layer 3 swich not one at bestby, it must handle higer bandwith used by video,     O by way one thing we all forgot all cisco camers also trasfers all video feeds to ftp sever,  all one needs do is stream live from ftp server probem solved ... View more

No, once they are full admin of the organization they will have access to everything. The correct option would be to give permission to specific networks and not the entire organization in this case. However, as you said, they need to have full access to the organization, so it won't work for you. ... View more

Wow!! That makes me feel like an idiot. I did changed to read only on the network and it is working exactly like I want. Not sure why read only on Organization didn't load the floor plans, but I got it working as wanted. Thank you very much for the help, that is going to be huge for my camera monitors. ... View more

> but I would have to tag over 500 cameras to allow them to access what they need   Easy peasy.  Bring up all the cameras.  Tick the box to select all cameras.   Untick the four cameras you don't want to give access to.  Then on the right-hand side, apply a tag to the remaining 496 cameras.     ... View more