Works fine from an iPhone @cmr    😉 ... View more

Hi @eye ,   If you have the time and desire to pursue the use of templates have a read through the best practice guides:   https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MS_Switching/Templates_for_Switching_Best_Practices   https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MX_Security_and_SD-WAN/MX_Templates_Best_Practices https://documentation.meraki.com/General_Administration/Templates_and_Config_Sync/Managing_Multiple_Networks_with_Configuration_Templates ... View more

Bit of a running theme recently with sites/Orgs dropping APs!   You spot that @PhilipDAth ? ... View more

I’ve always stayed away from Templates due to the amount of issues highlighted in posts in the forum.   Run a quick search…. ... View more

I’ll second @KRobert‘s post.  Infact, didn’t @cmr get his own Feature page at one point? ... View more

I’ve never relied on using the in-built search function on either the Cisco or Meraki sites.   Google is quicker and throws out better results ... View more

It works 😆 ... View more

And the likelihood of them using the newer features if still using Wave 2 APs is slim….   Common sense would prevail here. ... View more

Hi @latintrpt , just as long as you have a license Meraki support will provide you with support.   I would highly recommend a wireless survey especially if placing in critical areas or providing services such as wayfinding etc. ... View more

hi @alemabrahao  Why is not recommended?  I’ve done it successfully in the past without issues across hundreds of sites?   Is this documented somewhere? ... View more

Hi @nitin1234 , relevant to your query?   https://community.meraki.com/t5/Switching/Multicast-Basic-s/m-p/25867/highlight/true#M2125 ... View more

Is that a packet capture before/during the outage? ... View more

On that note, if they’re easily accessible give them a hard reset.  This would initiate the device to re-download firmware from the cloud ... View more

Hi @That1marine , anything of note being logged in your firewall upstream? ... View more

Hi @c_barsa_t    This may throw a spanner in the works:   https://trainingevangelism.zendesk.com/hc/en-us/articles/360018792193-CMNA-Promotional-Equipment-Program-Retirement ... View more

If you can get access to the above portal then that should provide more details around course availability, content etc ... View more

I believe you can sign up via the Meraki partner portal:   https://meraki.cisco.com/en-uk/partners/ ... View more

With regards equipment, mine came through relatively quickly, approx 4-6 weeks after completion  ... View more

Hi @c_barsa_t , from memory, there was no exam. It involved hands-on labs during the session so if you can follow a lab guide you should be fine.  Can’t comment about the difference between regions but would assume they’d all be the same (content wise). ... View more

From what I could glean from LinkedIn there’s some new 9000’ series Catalyst chassis being released.   Lots of push for the Monitoring of Catalysts via the Meraki dashboard. ... View more

@KarstenI  😉 ... View more

Hi @Pizza, reach out to your Partner account manager from whom you purchased the eqpt from!  They should be chasing this for you. ... View more

you’ll probably have to go for a one year anyway, read the small print:   NOTE: One-day licenses should not be used to extend the overall license expiration date. As there is a limit of how many one-day licenses can be applied, the licenses should be used with the intention to "true-up" different license expiration dates. ... View more