From the middle of the US ... View more

Cisco Partner ... View more

The printers have been a mix of DHCP and Static. This is being deployed in a new building with printers initially using DHCP then later they are reconfigured for static.   For the re-auth, I have the ISE server send radius-request for 43,200 seconds (12 hours). ... View more

I have a deployment with 350 Meraki switches using Cisco ISE 3.2 for dynamic VLAN assignment and no issues with VLAN association for silent devices (printers).     In the Access Policy settings I have "802.1x Control Direction" set to "inbound-only". I also have re-authentication set to 12 hours.  The "inbound-only" setting allows the printer to "hear" arp requests and receive print jobs from the printer server.  An authentication, if needed, is only triggered when the printer responds to requests.   I have done numerous deployments of ISE with Cisco switches. This is my first deployment of ISE with Meraki devices. Without the "inbound-only" setting, or equivalent on Catalyst switches, the printer never generates traffic to initiate authentication and also never receives traffic. ... View more