Meraki

MMD · ‎Jul 18 2024

We have the DHCPs on MX. As much as I'm aware the APIPA address will be assign to devices automatically if they are not able to reach to the DHCP server. However this does not seem to be the case here as the devices have assigned the IPs by our DHCP, when I'm looking at client logs. And no error or problem shows on DHCP logs.

RaphaelL · ‎Oct 19 2022

There is no easy way to do that. You could sort the syslog and filter the logs per public IP. let's say WAN1 has public IP 1.1.1.1 and WAN2 public IP 2:2:2:2, in the syslog you will see the WAN IP. You could also do a packet capture and see where the trafic is egressing. Currently the only ways that I'm aware.

MMD · ‎Oct 19 2022

I have two WAN uplinks on Maraki Mx and would like to send the traffic of a specific VLAN (1010) to WAN2. I define flow preference from VLAN (1010) to WAN2. In order to have Umbrella protection on this VLAN, the Merki Mx is integrated with Umbrella via group policy, and the group policy is applied to the VLAN (1010). It is supposed that I see the external IP for the traffic of VLAN1010 at Umbrella be WAN2, however, it is shown as WAN1 or primary link. Appreciate any though or idea resolving this?

Meraki

Community

About MMD

MMD

Community Record

Badges

Re: Event loge: All IP Conflict - Source IP and/or VLAN mismatch

Re: Flow preference confirmation on Meraki Mx

Flow preference and Group policy