Community
  • About mvalpreda
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Re: MX67 with internet and metro Ethernet connection

by in Security / SD-WAN
‎10-18-2019 02:59 PM
‎10-18-2019 02:59 PM
The Metro-E is carrying voice, and the internet connection stinks.....so I'll set up rules accordingly.   I just wanted to make sure the MX will do what I was thinking it would do on the Metro-E side. If that can route VoIP and other traffic between the sites, that will be great. ... View more

Re: MX67 with internet and metro Ethernet connection

by in Security / SD-WAN
‎10-18-2019 10:29 AM
‎10-18-2019 10:29 AM
Thanks @cmr I did figure WAN1 would be internet and the Metro-E would be WAN2. So WAN2 can still keep the Metro-E with a single subnet shared across the 3x different MXs and the MX will figure out all the SD-WAN bits?   Always buy Advanced licenses too 🙂 ... View more

MX67 with internet and metro Ethernet connection

by in Security / SD-WAN
‎10-15-2019 07:20 PM
‎10-15-2019 07:20 PM
Have an internet connection and a layer-2 metro Ethernet connection. The metro Ethernet is purely a layer 2 - no routing, VLANs, etc. Currently there are 3x SonicWALLs connected and each one has 10.1.1.1, 10.1.1.2, and 10.1.1.3 for their IP addresses. Would a Meraki MX67 be configured the same way?   I would want the internet connection to be auto-VPN and I'm sure that is not an issue. Would I think be able to do auto-VPN on the metro Ethernet? Or is that even needed? Since there is voice and data going over these connections, I would love to utilize SD-WAN.     ... View more

Different VPN policies based on user?

by in Security / SD-WAN
‎09-16-2019 02:10 PM
2 Kudos
‎09-16-2019 02:10 PM
2 Kudos
I'm guessing there is no update on different VPN policies/ACLs based on user name. Or has someone come up with a creative solution? Looking to replace an HA pair of Cisco ASA 5510s, and multiple VPN groups is a requirement.  ... View more

Re: Export public IP and WAN IP for all networks?

by in Security / SD-WAN
‎09-20-2018 11:55 AM
‎09-20-2018 11:55 AM
How about that?!? I remember trying to do that some time ago and those columns were not in there. Glad they are there now! ... View more

Export public IP and WAN IP for all networks?

by in Security / SD-WAN
‎09-19-2018 05:08 PM
‎09-19-2018 05:08 PM
Wondering if there is a way to export or query the public IP and WAN IP for all networks in an organization. I need to routinely check ~85 networks to make sure there is no double-NAT going on. It's a lot of clicking and figure there might be a better way.   Any suggestions? ... View more
My Top Kudoed Posts
© 2020 Meraki