if it is a flat 10mbps no matter what I would verify that the cabling is good and make sure you don’t have usage limits set under settings that limit connection speeds to 10mbps. ... View more

What exactly are you trying to accomplish? Seems silly to spend $350 on a firewall to disable the two things that make a firewall what it is… ... View more

You can create multiple “companies” on the web browser version however the settings do not carry between each company. Each company is limited to one GX, 50 GR and unlimited GS. Only four wireless networks per company. Typically I would recommend one location = one company, but if you are just using the APs there is nothing wrong with having multiple physical locations under one company, just keep the 50 AP and 4 SSID limit in mind. ... View more

The idea of the required license is hard to swallow but if you consider the total cost of ownership, it really isn’t too bad. For example, as long as you are not doing HA with a standby router, there’s no need for static IPs on your WAN interfaces as the autovpn feature will build the vpn when the MX checks in. Depending on your ISP, a static is going to run you $10-$20/mo. The enterprise license for an mx67 will pay itself off at that rate. ... View more

Ultimately the device determines which AP it will connect to, regardless of vendor.   a few recommendations to help: 1) move the printer further away from the AP. Being too close can have negative effects. 2) reduce the power level of the further APs. In an ideal environment, you want to reduce overlapping of acceptable signal strengths. 3) add a new SSID to just that one AP and connect the printer to it. This will 100% guarantee the printer only connects to that AP. ... View more

Meraki Go GX50 only supports client to VPN but no site-to-site tunneling. You should consider the Meraki MX67 if that is a feature you really need as the auto-vpn functionality (one of Meraki’s best features, IMO) is exactly what you are looking for.    I’d evaluate why you need this functionality first, as unless you have a need to access resources on another network, I try to avoid connecting networks together when not necessary. ... View more

Do you have static IPs configured on the switches or are you using DHCP/ DHCP reservation?    Having two devices with the same statically assigned IP will cause a conflict as the router must keep what’s called an ARP table with 1:1 mapping. If so, I recommend following the below article but selecting DHCP instead of static for both switches, or assigning different IPs outside of your DHCP scope (configured on your router).   https://documentation.meraki.com/Go/Meraki_Go_-_How_to_Assign_a_Static_IP_to_Meraki_Go_Equipment#The_Meraki_Go_App     ... View more

Yes. Under settings click Create Company. Once created you can switch between sites/"companies" by clicking the company name on the top of the page. I believe you are limited to one GX (router) per company. ... View more