Meraki

Community

About Amir_Khurshid

Re: Can i use two different MX versions in the same Network

by in Security & SD-WAN
‎Sep 29 2024 6:24 AM
2 Kudos
‎Sep 29 2024 6:24 AM
2 Kudos
@DarrenOC Irony is Cisco shipped MX95 as replacement to MX100. That is what surprise me unless MX 100 is EOL so now they are using MX95 in place of MX100... Thank you for the response Guys, appreciate your time. ... View more

Can i use two different MX versions in the same Network

by in Security & SD-WAN
‎Sep 27 2024 9:16 AM
‎Sep 27 2024 9:16 AM
Hello Folks,   Just curious to know if we can run two version of MX in same network ? Eg: MX 100 to be Primary and MX95 to be Spare on the same network ? It was two MX 100 initially one got faulty so thinking if we can use MX95 instead of other MX 100 or not. Another Question, - Will there be any SYNC issue ? - Any compatibility issue in upgrade ?     ... View more

Client could not associate with the WIFI getting error reason='invalid_mdie...

by in Wireless
‎May 30 2024 9:19 AM
‎May 30 2024 9:19 AM
Hi Team, I have a Printer which got disconnected from Network and then it tries to connect to Multiple AP's within a span of seconds. It tries but never pass association step and the logs shows reason='invalid_mdie'. Connection start time Client device SSID Failure stage Failure reason Thu May 30, 2024, 16:58:22 WEGENP010 Headless Association auth_mode='wpa2-psk' 11k='0' 11v='1' reason='invalid_mdie' radio='1' vap='2' channel='112' rssi='32' Thu May 30, 2024, 16:58:11 WEGENP010 Headless Association auth_mode='wpa2-psk' 11k='0' 11v='1' reason='invalid_mdie' radio='1' vap='2' channel='112' rssi='31' Thu May 30, 2024, 16:57:39 WEGENP010 Headless Association auth_mode='wpa2-psk' 11k='0' 11v='1' reason='invalid_mdie' radio='1' vap='2' channel='112' rssi='32' Thu May 30, 2024, 16:57:21 WEGENP010 Headless Association auth_mode='wpa2-psk' 11k='0' 11v='1' reason='invalid_mdie' radio='0' vap='2' channel='1' rssi='39' Thu May 30, 2024, 16:57:05 WEGENP010 Headless Association auth_mode='wpa2-psk' 11k='0' 11v='1' reason='invalid_mdie' radio='1' vap='2' channel='112' rssi='31' Thu May 30, 2024, 16:56:39 WEGENP010 Headless Association auth_mode='wpa2-psk' 11k='0' 11v='1' reason='invalid_mdie' radio='0' vap='2' channel='1' rssi='45' Thu May 30, 2024, 16:56:23 WEGENP010 Headless Association auth_mode='wpa2-psk' 11k='0' 11v='1' reason='invalid_mdie' radio='1' vap='2' channel='112' rssi='30' Thu May 30, 2024, 16:56:04 WEGENP010 Headless Association auth_mode='wpa2-psk' 11k='0' 11v='1' reason='invalid_mdie' radio='0' vap='2' channel='1' rssi='43' Thu May 30, 2024, 16:55:40 WEGENP010 Headless Association auth_mode='wpa2-psk' 11k='0' 11v='1' reason='invalid_mdie' radio='1' vap='2' channel='112' rssi='31' Thu May 30, 2024, 16:55:08 WEGENP010 Headless Association auth_mode='wpa2-psk' 11k='0' 11v='1' reason='invalid_mdie' radio='0' vap='2' channel='1' rssi='43'   ... View more

Re: New MX 17.10 Stable Release Candidate - fixes for VPNs and smaller appl...

by in Security & SD-WAN
‎Oct 26 2022 12:14 AM
1 Kudo
‎Oct 26 2022 12:14 AM
1 Kudo
Hello All, You need to check Content Filtering for the sites. As with upgrade Meraki is pushing some additional Content filtering groups on the site which impact Internet and IPSEC traffic (Syspro & Flowcentric ). Removing Content filtering categories resolved the issue. Also check Layer 7 rule and change Peer to peer traffic ... View more
© 2024 Cisco Systems, Inc.