Hi, go to services.msc -> Routing and remote access -> change "start type" to Automatic (Delayed start) and click "Start" Establish a LT2P connection. FIXED ... View more

It's not an issue as this agent is Windows based (something as vMware tools) Meraki vMX is linux based I see this on my vMX since 4 years and still don't have problems ... View more

Same issue with 2 x MX100 with firmware 17.8 ... View more

I used this document to config - https://documentation.meraki.com/MX/Deployment_Guides/MX_Warm_Spare_-_High_Availability_Pair   In short: i have switch with vlans configured vlan10 - ISP (ports 1,2,3) vlan 20 LAN on vlan 10 i put ISP media convertor or router (depend how is terminated) - port1 wan1 on MX1 is connected with cable to switch in vlan10 - port2 wan1 on MX2 is connected with cable to switch in vlan10 - port3 All IP addresses from ISP are in same subnet - both for MX's and virtual ip Port 3 on the MX is connected to swich in vlan20 - internal network Port3 also have vlan configured with gateway from internal network ... View more

I have this config in one of my sites i have /29 from one of ISP's You need 3 IP addresses to be able to work in HA 1 for MX1, one for MX2 and one to connect both MX's in HA (called Virtual IP) Then you will use your Virtual IP as inbound and outbound connection     ... View more