Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About lffsg
lffsg
Comes here often
Member since Apr 26, 2022
Feb 24 2023
Community Record
4
Posts
0
Kudos
0
Solutions
Feb 22 2023
9:11 PM
Thank you for your reply! We also have a vMX100 running on AWS us-east, and connects to the office network as Passthrough or VPN Concentrator. Is it possible to route the traffic from Singapore to this vMX100 and then to public internet ? Thanks!
... View more
Feb 22 2023
6:49 PM
Hello So far we have 2 MX84 and each MX is connected to internet, and 2 MXs are connected by site2site vpn, like (WAN1 : MX1 @US ) <----------Site to Site VPN ----------> ( WAN2 :MX2 @Singapore) and the employees in Singapore uses MX2 network while employees in US uses MX1 network. So far everything works fine; US employees can access internet via WAN1 and Singapore can access internet via WAN2; and both offices can access each other by site2site vpn. However recently we have an issue related to a customer. This customer has a limit for the IP sources for which only US ip address are allowed. So for US employees, no problem as WAN1 is US ip address allocated by US ISP; but for SG employees the requests to this customer are blocked due to Singapore IP on WAN2. How I can set Meraki for SG office so the requests to this customer (IP list known) will be routed through site2site vpn then traffic to internet from WAN1 ? So both office can call the customer. Thanks very much.
... View more
Apr 29 2022
2:05 AM
Yes I found that through REST API seems to be the only solution. The only thing is that if the boss would like to enable the API (Currently disabled). My idea is to wrote a script which is executed every 5 or 10 minutes (Via cron job ? ) then get the total clients count and update the group policy for the new bandwidth.
... View more
Apr 26 2022
6:16 PM
Hello, I am new to cisco meriaki devices. So far my company uses meriaki to connect to internet (ISP provided 500 MB/s bandwidth), and the current configuration on meriaki is set to 10MB/s per client (By setting the bandwidth limit in Group Policy). However sometimes as there is not much users connected to the office network (less than 10). It is still limited to 10MB/s per user. Can we set the meriaki client bandwidth somehow 'dynamic' ? For example, when there are more than 50 clients connected, 10MB/s for each client; from 30 to 50, 25 MB/s; lsss than 10, 50 MB/s ( Or it can be dynamically Total Bandwith / Client Count ) I have searched the documents and google, but they only shows how to set the static bandwidth control. Thank you.
... View more
© 2024 Cisco Systems, Inc.
