Hello Rei!    At your earliest availability please open a support ticket via the Meraki Go app where we can better assist you.  ... View more

There was a new feature recently which allows you to tag which SSID is going to be on which AP. It's possible that your guest SSID hasn't been allowed across all your APs.    Go to your app then networks - guest network -settings -  network availability - limited broadcast - and check which APs your guest SSID is allowed on.  ... View more

No gotchas I can think of. But I'm going to assume you're prob moving an MX, I've used this doc before. Might want to take a look and read through it: https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MX_Security_and_SD-WAN/MX_Templates_Best_Practices   There are other docs for different devices though so might want to take a look beforehand just in case.    Something I do just in practice is taking screenshots of the info I need and saving them with the device name/page so I can go back and do it. You made mention of ports and stuff. This doc is helpful to create a switch profile for ports: https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MS_Switching/Templates_for_Switching_Best_Practices#Creating_and_Using_Switch_Profiles    Looks like switch profiles are good for the same switches/same ports so might want to take that into consideration for deployment.          ... View more

There doesn't appear to be a way to automate it as far as I know. You might want to look into creating a template for the new target network that would have your established config from your old one.      ... View more

Hello! Were you able to get help with this? There's documentation on how to access the local status page, did you use this doc here? https://documentation.meraki.com/Go/Meraki_Go_-_Local_Status_Page#:~:text=All%20Meraki%20Go%20hardware%20include,to%20assign%20a%20static%20IP.   Did you open a support ticket?   ... View more

Did you open a support ticket for this issue? If you did already has it been resolved? ... View more

No, at this time I do not see a setting where what would be possible.    If you truly need it though I think a Meraki Enterprise MR would would great for that.  ... View more

Not sure if you got your answer yet or not, but I do not believe there is a way to make firewall rules on the Meraki Go devices.    As far as the security subscription, that has a few more features for things like content filtering but not for configuring the firewall in the manner requested.  ... View more

Did you open a support ticket for this or did you get the device working already?  ... View more

1. You do not need a Meraki Go license to have the devices. If you want to add on a Security subscription there is a license for that that you'll have to purchase it in addition to your GX.    2. Yes, you purchase the devices and onboard in the app.    3. Other than the original manufacturer warranty there isn't an additional warranty.  You would need to go through the store you purchased it from, not through Meraki.   4. You don't require a subscription to make a Meraki Go account, just an email address.  ... View more

In your original account when you go to your mobile app > Networks > "Desired Network" > Settings > Network Availability there will be two options, one for "Schedule" and one for "Limited Broadcast".   Do you have any settings that would constrict the network from being added to the AP?   Also, do you have the desired network set to "Active" or "Discoverable"? This section is further down in the mobile app and could also restrict the network from being added or discovered by your devices.  ... View more