Let it sit for 24 hours and the 'bad IP assignment' hasn't cleared itself, but network remains online.  ... View more

On site, connected to firewall over LAN (wired.meraki.com) and set the static IP settings on the local device. After an automatic reboot cycle, local indicated all good. Dashboard took 10+ minutes to update. Checked to make sure DNS was correct. Internet traffic is up and testing fine, but dashboard continues to say bad IP assignment even after configuration synchronized with Meraki. Static IP settings on the dashboard indicate MX WAN 1 is still pulling a local IP (192.x.x.x) and dashboard says "Bad IP assignment configuration". If I click edit on the WAN 1 configuration, my static IP settings are there.    I think I've seen this in the past - the resolution was to remove the firewall from the network and re-add it to force an update. I'm hesitant to do this here though as the appliance is passing internet traffic just fine.  ... View more

Finally got through to support (75 minute wait time) and they were able to confirm the same thing. It sounds like I will need to program the static IP at the local config page instead of through the dashboard as @ww  is correct, the first IP of the subnet is what the MX is showing as the current public IP address, even though the WAN address is a local IP. Headed on site to make the change now. Thank you!  ... View more