Agreed!!  A simple remote proxy in the MX on the Tools page where you could select the WAN interface and use HTTP/S to configure / review a broadband modem would be such a great feature.   We have duel broadbands at each location, sometimes with the same broadband subnet / gateway.  So even getting on an internal PC and hitting the gateway IP unless you shut down one broadband (or radically manipulate SD-WAN traffic shaping) you can't control which broadband modem you will get.    We've made the same request several times.  Maybe getting some up votes in the community will help.  ... View more

Question to the group. When you hit 429, how do you investigate/troubleshoot/workaround it? ... View more

Thank you.  I just received confirmation from one of my Cisco contacts a couple of days ago.  This is very good news! ... View more

Just adding my voice for getting that uptime in dashboard or via API ... View more

I’ve had it on MG41 brand new out of box. Rebooting lime 4-5 times fixes it. I reboot and wait for it to appear online on the dashboard. Factory reset does fix it, but it sometimes doesn’t.  ... View more

We are having this issue, has anyone found a resolution to it? ... View more

This is only true for devices on the network. I'm only getting a handful of MGs with the API call below.  We have 250 that are unclaimed.  I can probably come up with a python script to create a dummy network and add the devices to get the information.    response = dashboard.organizations.getOrganizationDevices(     ORGID, total_pages='all',models='MG41' ) ... View more

sungod has it nailed in python the code below will do what OP is looking   import meraki API_KEY = "API-KEY-HERE" dashboard = meraki.DashboardAPI(API_KEY,suppress_logging=True)   response = dashboard.networks.getNetwork(     network_id ) #This looks for existing tags and stores it into local variable updated_tags = response['tags'] #Below adds two tags. updated_tags.append('WIFI') updated_tags.append('NEW YORK') #Finally update the network with the tag. Keeps the existing tags and adds the two I mentioned. response = dashboard.networks.updateNetwork(     network_id,     tags=updated_tags ) print(response) ... View more

You will need to open a case with support about that bug.   You've managed to find a corner case that is rare. ... View more

Iperf3.1.3 in terminal direct to provider’s servers. (Breezeline, old miami Atlantic broadband).  I’m still fiddling so we see what I find out.  It’s probably something simple, but no log changes have been made to the threat center setting since end of 2021. It’s also happening at another Propery in network on the organization that also has an MX-85.  I have some unopened spare MX-85’s that I’ll probably swap in with it’s default configuration out of the box. And we see what happens.  Then I’ll do a line by line compare of configuration if indeed the out of box one is back running 950+   ... View more

Thanks for the input. ... View more

@ls08 you are correct, today there is only the /networks/{id}/wireless/airMarshal endpoint for listing out the most recent scanning results from Air Marshal.  I'll check if there's an FR in place (or add one) to get the ability to configure Air Marshal and/or configure those dual-radio APs to dedicated scanning mode and back off.     Note that you don't necessarily have to turn them into dedicated scanners if it acceptable to have Air Marshal run opportunistically once a day without having to disrupt client connectivity.  More info in the documentation. https://documentation.meraki.com/MR/Monitoring_and_Reporting/Air_Marshal   ... View more