Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About Davey_Hayes
Davey_Hayes
Comes here often
Member since Jan 27, 2022
Community Record
9
Posts
0
Kudos
0
Solutions
Badges
May 9 2024
7:04 AM
The AP's in question are only running 5Ghz. All AP's & Antennas are mounted on boards which are hung from the Cabling containment systems at each end of every aisle. Profile has been added for these AP's using the ANT2513P4M-N antennas TX power setting 5-7dBm , most AP's have settled at 5dBm , AP's using Unii1 channels are restricted to 4dBm , Regulatory , but we have AP's on Unii1 channel covering the whole aisle whilst AP's on unii2 & extended are barely covering a 1/4 of an aisle on power level 5
... View more
May 9 2024
5:44 AM
Hey D_Tak , case opened with Tech , Ekahau survey file and a list of dodgy /inconsistent AP's and good consistent AP's has been supplied. Initial post was to ask for any pointers or known issues to look at along with a support call
... View more
May 9 2024
3:33 AM
Hi All Anybody have any experience with MR86's with /ANT2513P4M-N Antennas? Having completed a Ekahau survey of a New Warehouse implementation it appears that we have a large amount of AP's having inconsistent signal range. These AP's all have the same profile and correct antenna setting configured as the AP's with consistent and expected signal range. All installed at same Height and method , one AP at each end of an Aisle within the Aisle system. Switchports have also been checked . Aware of the Unii1 channel power restriction also. Any Ideas where to start looking as well as contacting support? Any pointers much appreciated Thanks
... View more
Aug 8 2023
8:10 AM
OK so to calm the farm,,, Meraki have admitted there is a Bug with DFS causing the AP to stay on the Unii 1 channel , this is being looked into by Engineering , and in the mean time I've configured the AP's with Dynamic channel allocation which has in most part calmed the situation down , but in doing so have now seen another issue, again related to DFS... AP's are now going into a non broadcast state after DFS events , i.e registered but not broadcasting SSID's so clients cannot connect , anyone see this in the Central London Area??
... View more
Oct 31 2022
6:13 AM
Already done , another non starter
... View more
Oct 31 2022
6:06 AM
From the vast amount of design and post survey work carried out with Ekahau this is a non starter
... View more
Oct 31 2022
5:58 AM
LOL that a Joke....? we have open plan environments with a potential of 400 users per floor with additional meeting rooms , how'd you propose disabling DFS channels with 25 AP's per floor?
... View more
Oct 31 2022
5:46 AM
Hi All We have a fairly large deployment in London which is designed for dense mobility / voice usage. Have implemented a well spaced manual channel plan on 5ghz with next to no CCI. Seems that DFS is causing client issues due to choosing the same UNII 1 channels on neighbouring AP's , post 28.7 upgrade, I estimate 80% of 300 AP's at this location needed further reloads to revert to configured channel. Same is happening on other sites around the UK This is becoming a big problem as the offices is now being used more as more users are returning and in the habit of using WiFi .. Any suggestions as the support service is P155 poor
... View more
© 2024 Cisco Systems, Inc.
