Hi all,   I'm currently working on getting our PRTG instance to report on Meraki devices via API, but at this time PRTG only works with numbers, not text fields. As such, I'm trying to at least get SNMP setup.   I have access to two organizations, one has about 50 devices in, one has almost 800. When I setup PRTG to find the devices using the OID 1.3.6.1.4.1.29671.1.1.4, for the org with 50 devices, it brings up the custom table, when I do it on the org with 800 devices, it always times out. The only difference I can see is the amount of devices. Is there something about trying to poll lots of devices that just doesn't work? I'm trying to work out if this is an issue Meraki side or PRTG side. I've tried increasing the timeout, but 10 seconds is fine for the 50 org, 30 seconds still fails on the 800 org. ... View more

Hi,   Sorry if this isn't the best section, I'm just going by previous posts about SNMP.   I'm looking to get all our Meraki devices present in our PRTG, but I'm having issues with it. I've liaised with PRTG, but they've pushed me in this direction.   I've set up SNMP in Meraki, got the address, community string and port etc setup in PRTG, but when I use the OIDs from the MIB, it imports all our devices with really weird names containing random symbols, so I can't work out what device is what.   PRTG asked me to do some tests with their SNMP tester, but when I try and walk or scan for interfaces, none are found, so I'm wondering if I've not configured something?   Thanks, Jack. ... View more