Meraki

Community
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 

About CaptainMango

Re: GX20 + GR10 VLAN question

by in Questions (and Answers!)
‎Jan 8 2022 2:48 PM
1 Kudo
‎Jan 8 2022 2:48 PM
1 Kudo
Hi, I also would like to add a +1 fore more granular VLAN firewall rules. I understand that the VLANs already can be "secured" at this point, I think however it would make sense to add the possibility to configure more specific rules (e.g. VLAN 1 can interact with 2 and 3 but 2 and 3 cant interact with each other).  What I also would like to point out is, that there is already a feature to block specific devices from wireless networks. I really don't understand why this is not possible for wired networks as well.   ... View more

Re: Inter-VLAN communication

by in Questions (and Answers!)
‎Dec 27 2021 5:27 AM
‎Dec 27 2021 5:27 AM
Hi, just a small update: It seems that I can ping to other VLANs, however, I'm losing about 40-50% of the packets and the latency also seems very high:   ("Zeitüberschreitung der Anforderung." = request time out) >ping -t 192.168.0.79 Ping wird ausgeführt für 192.168.0.79 mit 32 Bytes Daten: Zeitüberschreitung der Anforderung. Zeitüberschreitung der Anforderung. Antwort von 192.168.0.79: Bytes=32 Zeit=4ms TTL=63 Antwort von 192.168.0.79: Bytes=32 Zeit=3ms TTL=63 Antwort von 192.168.0.79: Bytes=32 Zeit=4ms TTL=63 Antwort von 192.168.0.79: Bytes=32 Zeit=6ms TTL=63 Antwort von 192.168.0.79: Bytes=32 Zeit=3ms TTL=63 Zeitüberschreitung der Anforderung. Zeitüberschreitung der Anforderung. Antwort von 192.168.0.79: Bytes=32 Zeit=3ms TTL=63 Antwort von 192.168.0.79: Bytes=32 Zeit=6ms TTL=63 Antwort von 192.168.0.79: Bytes=32 Zeit=7ms TTL=63 Antwort von 192.168.0.79: Bytes=32 Zeit=4ms TTL=63 Antwort von 192.168.0.79: Bytes=32 Zeit=3ms TTL=63 Antwort von 192.168.0.79: Bytes=32 Zeit=2ms TTL=63 Zeitüberschreitung der Anforderung. Zeitüberschreitung der Anforderung. Zeitüberschreitung der Anforderung. Zeitüberschreitung der Anforderung. Zeitüberschreitung der Anforderung. Zeitüberschreitung der Anforderung. Zeitüberschreitung der Anforderung. Zeitüberschreitung der Anforderung. Zeitüberschreitung der Anforderung. Zeitüberschreitung der Anforderung.   ... View more

Inter-VLAN communication

by in Questions (and Answers!)
‎Dec 25 2021 12:21 PM
‎Dec 25 2021 12:21 PM
Hi, I try to configure my new Meraki Go setup. I've a GX20, GS110-8P and a GR10. The GX20 has the connection to the modem and a trunk connection on port 2 with the default VLAN1 and allowed VLANs "all". The GS110 has the default VLAN 1 with allowed VLANs "all" on port 1. the GR10 is connected via trunk ports on the GS110 on port 8 (VLAN 1, allowed VLANs "all").   I've a couple of VLANs, and I want that 2 of them can communicate between another: VLAN20 with 192.168.20.0/24, GX has .1 VLAN30 with 192.168.0.0/24, GX has .1 There is a printer on VLAN30 with .79, connected to the GS110 on port 5. Port 5 is configured to be an access port with VLAN30. There are a couple of PCs on VLAN20, all connected to GS110 ports which are configured as access ports with VLAN20.   Now, the problem is, that I cannot ping a device from VLAN30 to VLAN20. I tripple checked already that the "Secure this network" buttons for the networks are disabled, which they are. I can't find any firewall or routing settings so I sadly can't really troubleshoot anything else.     What am I missing? Hope anyone can help!  ... View more
My Top Kudoed Posts
© 2024 Cisco Systems, Inc.