if your configuring at home: from your LAN side of your home router connect it to the WAN/Internet side of your MX. let it check in (white light) and then complete any firmware download (flashing white). Then if your setting up a static IP on the internet port, connect a laptop to the LAN side of the MX and do an IPCONFIG in windows. Open a browser to that IP and log in using the serial number as the login info. Once logged in set your static is on internet the internet port / secondary port at needed. That’s it (with our adding it to the network in the dashboard in question) As long as the MX can get the the internet at the site the rest of the config will sync when you remove the old mx and add the the new one from the network. it’s really quite simple, as mentioned in my previous post - my only issue in the past has been the static IP not taking on the local config, I always double check these days and not ram into any issues.
... View more
