Meraki

Henk1961 · ‎Jan 18 2024

If it is that critical for you why not create an additional SSID with complex WPA key that is distributed to your managed clients by policy. This can be used as a backup in case the AAD fails. The additional SSID is disabled in Meraki and when AAD fails you simply activate it.

Henk1961 · ‎Dec 22 2023

So basically you have to delete the stack and the switches are automatically converted to standalone switches and configuration will stay the same?

Henk1961 · ‎Dec 21 2023

Hello, We have a stack of 3 Meraki switches. Two switches should be removed from the stack and the last switch should be converted to standalone switch. What is the approach to convert a 3 member stack to just one single switch without loosing the config of that last switch?

Henk1961 · ‎May 1 2023

How can I prevent my switches from using it's name including mac address when using DHCP. Just want that it uses it's name without MAC address. Example: Now it is registered in DHCP/DNS [switch-hostname]-[mac].domain.com I want it to register in DHCP/DNS like [switch-hostname].domain.com Is this possible?

Henk1961 · ‎Nov 10 2022

Hello, If a Meraki switch has a static IP address does it fallback to DHCP if it cannot reach the gateway? I understand that MX and MR devices do, but not sure if Switches also do this.

Henk1961 · ‎Nov 16 2021

Hello, I want to replace a stack member with 48 ports by a stack member with 24 ports. What will happen in that kind of a situation with the port configurations? MS225-48FP ==> MS225-24P Regards, Henk

Meraki

Community

About Henk1961

Henk1961

Community Record

Badges

Re: Azure AD authentication on Meraki WiFi

Re: Convert Switch stack to non stack

Convert Switch stack to non stack

Switch registers in DNS with correct name including mac address.

Do Meraki switches fallback from Static IP to DHCP

Stacking and replacement