Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About NeilB
NeilB
Getting noticed
Member since Apr 9, 2018
yesterday
Community Record
22
Posts
5
Kudos
0
Solutions
Badges
a week ago
Hi All, When enabling and adding VLANs to a VLAN Profile, do you need to add all VLANs that are used by that switch / stack, or is it only going to be the Named VLANs that are going to be used in the RADIUS response? Sorry if this is a bit of a strange question, just want to make sure i cover all bases before enabling. Thanks in advance. Cheers Neil
... View more
Jul 10 2019
2:13 AM
Actually, is there a way to add in the blocked note when sending the API POST?
... View more
Jul 8 2019
3:39 AM
Hi All, I'm creating an App that can be rolled out to our Service Desk and Security Team to allow them to manage users devices etc. on our networks from the API. One of the bits i'm looking to do is block a device from the network if we see any malicious activity etc. being conducted on that device. However, i'm unable to find what the policy ID maybe for the in built Meraki Blocked policy. I've checked a device that is blocked on a network from the API and it says normal, even though on the dashboard it is actually blocked with a custom message being presented to it. :S Any one had this issue before and can maybe shed some light on this? Thank you! Cheers N
... View more
Labels:
- Labels:
-
Dashboard API
Jun 21 2019
7:20 AM
Yeah, can view it all in that view. Just wondering if could export that info from the table. Guess not at the moment.... 😞 Ah well... will have to figure it out another way. 🙂 Thanks anywhoo! N
... View more
Jun 21 2019
7:12 AM
Hi @jdsilva Thanks for the fast response! 😄 I can only see Firmware Security or Firmware Status. Ideally i'd like to export the actual version of the Devices at this time. Cheers N
... View more
Jun 21 2019
7:04 AM
Hi, Does anyone know if you can export the Firmware Version table of all the devices in the Organization? There isn't the usual export to CSV option on that page. Cheers Neil
... View more
Oct 12 2018
12:52 AM
Ah, Thanks for testing. That is interesting. That will cause some issues for us. We don't use the same template for both stack types as we have some non meraki switches that we have at some sites that require more ports than on the back of the MX65's, however we have some smaller sites that, the amount of ports available on the 65's are sufficient, so need to enable all the ports as access ports.
... View more
Oct 11 2018
8:40 AM
Hi, They are using the same /14 range for both template types. the only difference between the templates is due to us using MX65's where some sites have switches and some just use the local ports depending on the size of the site and how many ports are required. Cheers
... View more
Oct 11 2018
3:04 AM
Hi, We have a number of templates setup in our dashboard to manage different site types for the MX's we have. As part of the templates, we issue out subnets for each VLAN. I just have a question about, if we change a network to be bound by a different template, will it just continue with the current Subnets it has been assigned initially, or will they be issued new ranges? Sorry if this is a silly question, just wanted to be sure before i move a network over though. Cheers Neil
... View more
Sep 18 2018
3:42 AM
Ah i thought it flashed green to say it was performing an upgrade. I did manage to get it working previously with a Cisco 1GB copper SFP connected and that worked fine, now i'm just plugging back into port 1. Will try again with an SFP and see if that makes any difference.
... View more
Sep 18 2018
2:11 AM
The local status page initially says its connected, then after about 5 mins is reporting unable to connect. :S I did notice that it was trying upgrade and was at 37%, but none of the lights indicated that it was upgrading. Yeah i tried turning spanning tree off as i was thinking the same that it was shutting the port down, but no joy. 😞
... View more
Sep 18 2018
1:40 AM
Morning all, I'm having some issues with connecting a MS 8Port switch to my BT Home Hub 5. Initially it connects successfully and reports all fine on the dashboard, however after approx 5 mins, the orange light appears on the front and it drops into offline. It doesn't show on the home hub as a connected device either. :S I can't see any reason for it as i have had it working before. Has anybody else seen this before? Cheers Neil
... View more
Sep 14 2018
7:09 AM
1 Kudo
I'd like to see it, just to be able to get statistics from the api, so we can monitor usage to ensure that we don't run into any issues with full scopes.
... View more
May 31 2018
3:49 AM
I was just wondering if Meraki had this on the cards for the near future? essentially just a timeout value on the mac address learnt for each port to say 15 mins.
... View more
Apr 26 2018
6:14 AM
I did as MRCUR said and contacted our Rep. All enabled within a day. Handy tool to use. Noticed there are still some latency issues when adding some filters, but it is still in Beta, so not really that bothered overall.
... View more
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 2 | 296 | |
| 1 | 8076 | |
| 1 | 12730 |
© 2025 Cisco Systems, Inc.
