Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About CESI
Community Record
12
Posts
1
Kudos
0
Solutions
Badges
Apr 8 2021
4:34 AM
Indeed I tried to add my client to the whitelist but it did not work. On the other hand I don't have the same IP when I'm on the Alcatel Switch and on the Meraki Switch
... View more
Apr 8 2021
3:08 AM
Even when I connect to the Meraki switch, it doesn't work. It looks like a misconfigured firewall rule, but still I allow all traffic. I have tried adding my URL to my whitelist, but the problem persists. The VW of the Tamat and my PC are pinging each other
... View more
Apr 8 2021
1:25 AM
Hello ! I have a problem when I want to connect to the TAMAT web interface (https). I have already tested with different browsers and the problem persists. The pings work... But I can reach the ESXi web UI (https)... Configuration: - Cisco MR44 AP connected to Cisco Switch MS125 and MS125 to Alcatel switch. - ESXi / TAMAT are on the same VLAN (69) - Wireless firewall and Traffic Shaping allowed When I connect directly to the Alcatel switch in VLAN 69, I can access the TAMAT web interface. Thanks for your help!
... View more
Mar 30 2021
4:33 AM
1 Kudo
It works! So I tagged my two VLANs and did the same on my SSID's But the first time it didn't work. Thanks for help ! 🙂
... View more
Mar 30 2021
2:06 AM
Yes, I think I will contact the support. I have only one AP 😞 I hope it is functional 😅
... View more
Mar 30 2021
12:04 AM
@ww I did the test, by putting a port in vlan 100 and connecting directly to it, I get an IP. @cmr In this case, the DHCP server is directly in vlan 100
... View more
Mar 29 2021
8:08 AM
But when I disable VLAN Tagging, I get an IP because I reach the default VLAN (69). So my DHCP is working fine, I don't know why when I enable VLAN Tagging, DHCP doesn't give me an IP.
... View more
Mar 29 2021
7:58 AM
Hi ww ! I have DHCP Discover in the capture but I get no IP. I configured my port like this: vlan 69 port default 3/24 vlan 100 802.1q 3/24
... View more
Mar 29 2021
7:32 AM
I have an IP when I connect to the port with the default vlan 100. All the equipment is on the same switch and the other AP works well with my vlan 100
... View more
Mar 29 2021
6:47 AM
Hi MarcP, Thanks for your reply, here is my firewall configuration, normally everything passes. I have already tried in Bridge Mode but the problem persists 😞
... View more
Mar 29 2021
6:03 AM
Hello, I am trying to set up a ssid for TOIP. But when I connect a phone to this SSID, it doesn't get an IP back. I am using a Meraki MR44 and an Alcatel 6450 switch. I already have an old AP1602i with the same port configuration. Here are the configurations: Thanks for help !
... View more
© 2024 Cisco Systems, Inc.
