Solved! Go to solution.
Maybe the tamat server only allow specific ip range on port 443
If you connect to ms120 on access port in vlan 69, does it work?
If you connect on wifi. And whitelist that client in the dashboard. does it work?
i did not mean url whitelist but client whitelist. so browse the wificlient. then set it to white list it at policy section.
however is does not matter because the problem is also on the meraki switch so its likely not a wifi/ap problem.
did your client get the same IP and gateway address on the ms switch as the alcatel switch?
Maybe the tamat server only allow specific ip range on port 443
Problem resolved, I changed the network tamat