Hello,   we have the following design.   VLAN 1   subnet 10.150.0.0/22   MS350 STACK With two switches The switches are getting an DHCP lease from a DHCP server on VLAN1   Switch A  10.150.2.105 with Gateway 10.150.0.2 Switch B  10.150.2.106 with Gateway 10.150.0.2   The stack is also configured in DHCP & ROUTING name:  uplink Subnet: 10.150.0.0/22 Ip: 10.150.0.2 vlan: 1 DHCP Settings: Off OSPF Routing: Disabled Multicast routing: Disabled   Also configured an static route Name: default route subnet: 0.0.0.0/0 next hop ip: 10.150.0.1 (router to the internet)   In this situation the switches are not able to communicate to the cloud, and try to find a path over other configured vlan id.   NOTE: I create a work-around for ( in my opinion )  this BUG I found out that the switch was able to get an address but not able to route over the virtual interface (10.150.0.2) and follow the configured default route.   I created an reservation on the DHCP server and configured 10.150.0.1 as the router in this reservation. possible to create a static IP configuration for this switch management address also with the 10.150.0.1 as gateway.     ... View more

Dear, while Return the policy assigned to a client on the network return the correct information (see below) There is no implementation visible to also set this information for a certain client. Is there a way to set this information in a API call?   "Different policy by SSID"   0 : @{type=Blocked; name=WIFI-Guest} 1 : @{type=Group policy; group_number=100; name=WIFI} 4 : @{type=Normal; name=WIFI_D} mac : AA:BB:CC:0D:EE:00 type : Different policies by SSID ... View more