Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
- About HaniAbuelkhair
Community Record
27
Posts
4
Kudos
0
Solutions
Badges
11-02-2021
04:59 AM
@PhilipDAth Should i allow or while list the doh.opendns.com ? Thanks
... View more
11-01-2021
11:59 AM
Hi I am getting this error massage on my Meraki I don't know why Meraki blocked the Umbrellas Any idea ? Content filtering blocked URL url https://doh.opendns.com/..., server 146.112.41.2:443, category Proxy Avoidance and Anonymizers
... View more
07-09-2021
09:03 AM
MX was UP, Switches UP, AP's UP BUT UPLINK was Red and shows Down Wired issue I have site to site VPN with another Maraki but i don't think its relevant at all
... View more
07-09-2021
09:00 AM
No from the LAN no internet connection But i was able to ping local PC from the Meraki dashboard but i could not ping 1.1.1.1 or 8.8.8.8 from the meraki dashboard
... View more
07-09-2021
07:01 AM
HI I have wired issue happened I have MX67 It was showing up on the Meraki dashboard, and WAN is down I was able to access the Meraki Dashboard with no issue and i was able to ping the local IP's but not the internet IP's How come WAN is down and i can access my Meraki ?
... View more
06-15-2021
12:41 PM
1 Kudo
Hi, I have MX67 when i was having one WAN interface active i can easily monitor my live traffic upload and download from the appliance status > uplink When i activated the 2nd WAN interface now it shows WAN1, and WAN2 utilization and i cant monitor or see my upload, and download live traffic! Is there any way to monitor the live traffic upload and download if I HAVE 2 wan's active From the summary reports it shows the history of the total upload and download
... View more
05-17-2021
08:12 AM
I have Z3 and i found this in the log source_client_ip: 192.168.1.113, source_client_mac: 20:4E:F6:CB:15:3D, source_client_assigned_vlan: 0 « hide last_illegal_ip 100.115.92.14 client_total_illegal_packets 558 all_total_illegal_packets 2973 last_reported_total 2963 I am getting this from Chrom box's randomly not sure why and its VLAN 0 !!!!!!!!!!!!!!! i have only one VLAN 1 And whats this IP 100.115.92.14 ? its not even the WAN IP!!! And when i run packet capture nothing is there and the chrom box is set to be DHCP no static
... View more
04-19-2021
05:50 AM
We have only one WAN ISP connection and Cellarer data
... View more
04-19-2021
05:50 AM
Hi, We disabled all the security features for troubleshooting purpose IPS, AMP, And content filtering And from the log the Phones keep request to register and the received OK acknowledge, then request to register again and again
... View more
04-16-2021
12:49 PM
I have MX67, and MS120-24P switch in two locations similar setup And we have issue that the Phones keep try to register to the server and keep drop calls in both locations Not sure what we can check as its straight forward setup Any idea about have such issues ? The SIP company is dsmtel
... View more
01-14-2021
06:33 AM
@KarstenI Thank you very much again Yes after upgrading my FP1010 i can see the switch port now so i have 2 smart switches connected to port 2 on the FP1010 and each one will be configured with switch port, with the native VLAN, and allowed VLAN Native VLAn 1 Guest wifi VLAN 10 (used by the meraki AP) And then connect the switches to these ports, and connect the Meraki Ap's to the switches with trink port as well and VLANs will work i assumed
... View more
01-13-2021
07:53 AM
I am not sure if i get you correctly above is my interfaces I am using Ethernet 1/1, and Ethernet 1/2 as WAN interface And rest of the ports i need to use them to connect my 3 switches as a stunk on VLAN 1 and create DHCP for all the uses, and allow other VLANs and then connect my Meraki MR33 to the switches for the staff SSID will get the VLAN DHCP and Guest ssid will use another VLAN 10 with its own DHCP from the FP 1010 similar to the Meraki If i removed the bridge then i need to configure the same VLAN's on all the ports which is not possible So how can add the all Ethernet ports on one group and start assign VLANs on them simialr to the Mx74 Sorry but this is my 1st experience with FP if you can help will be really appreciated
... View more
01-13-2021
05:44 AM
@KarstenI I have the FP1010 now with me The existing setup is Meraki MX64 connected to 3 switches SG350MP, and I have 6 Meraki MR33 connected to the switches and getting the VLAN’s, and DHCP from the Meraki MX64 I need to remove the MX64 and replace it with FP1010 But in FP1010 I can configure Bridge group to connect the 3 switches with same subnet but can’t create VLAN’s on bridge group to support the Meraki AP VLANS, VLAN can be created as subinterface on an interface ! And how to configure the FP1010 as truck ? Thanks in advance
... View more
12-18-2020
12:35 PM
@KarstenI Thanks a lot this is very helpful
... View more
12-18-2020
08:18 AM
Thanks @KarstenI for the update And i agree with you we will lose the C omplete visibility from client to internet Do you connect the Meraki AP directly to the FTP 1010 or to a switch ? So you just created VLAN on the FTP1010 and configure the port to be Truck in order to pass all the Meraki VLANs (staff, and the Guest) ? And then DHCP for the client Any specific tips for the config or its straightforward as i never did a config for FTP devises
... View more
12-18-2020
06:51 AM
Yes its AP's using local breakout/bridge mode I have 6 MR33 AP's now connected to MX64, and for some reason we need to replace the Mx64 with Cisco FTP, or Fortigate.
... View more
12-18-2020
05:35 AM
HI, I have 6 Meraki AP's connect to a Meraki MX67, but we have to change the MX67 and replace it with Cisco FTP firewall 1010 for some reasons. My question is can we connect Meraki AP to Cisco FTP firewall 1010. If yes can you please share some ideas how ?
... View more
12-18-2020
05:28 AM
But one to one, and many to one NAT is not supported by Meraki if its connected to a non Meraki devise. I got confirmation from Cisco Meraki support on that today
... View more
12-17-2020
10:03 AM
HI, Can I do Point o Point VPN between Meraki and Non Meraki (Cisco Firepower) and use Many to one identity NAT? I read a document says it will not https://documentation.meraki.com/MX/Site-to-site_VPN/Site-to-site_VPN_Settings But to be honest this is wearied Any ideas ?
... View more
11-19-2020
10:15 AM
@dlowery Oh its a long story But its a setup requested by the customer to do this
... View more
11-19-2020
05:24 AM
@KarstenI i was expecting a loop as well as the two switches when you configure the port directly with the VLAN dose not communicate with the other switch, and the Z3 become a gateway for them, and the full setup can prevent loops but not this setup
... View more
11-19-2020
05:00 AM
HI, I have a setup of Mx67, two M120 switches connected and working fine with few VLAN's setup I have new requirements to connect few ports from both Switches to another Meraki Firewall Z3, and the machine will get the DHCP IP address from that Meraki Z3 not the main Mx67. And all traffic should be passed to the Z3. I connected the Z3 to one port on Switch1, and another port on Switch 2 and setup these two ports from the switches as Trunk port as they will use VLAN 20 which created from Z3. Then i configured the the other ports as access with VLAN 20 only on the switch port not the Meraki. VLAN 20 is not been used in the Mx67. When i did that 1st to Switch 2 it works fine, but when i connect the Z3 to Switch 1 went down nd had to remove all the config and cabled in order to work again. Any suggestions.
... View more
11-19-2020
04:51 AM
1 Kudo
Thank you all it works perfectly fine
... View more
11-16-2020
09:36 AM
1 Kudo
Thanks a lot Really appreciated
... View more
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 1 | 943 | |
| 1 | 1728 | |
| 1 | 1776 | |
| 1 | 1781 |
