Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Become a member of the Cisco Meraki Community today
Get answers from our community of experts in record time.
Join nowAbout HaniAbuelkhair
Community Record
27
Posts
4
Kudos
0
Solutions
Badges
Nov 2 2021
4:59 AM
@PhilipDAth Should i allow or while list the doh.opendns.com ? Thanks
... View more
Nov 1 2021
11:59 AM
Hi I am getting this error massage on my Meraki I don't know why Meraki blocked the Umbrellas Any idea ? Content filtering blocked URL url https://doh.opendns.com/..., server 146.112.41.2:443, category Proxy Avoidance and Anonymizers
... View more
May 17 2021
8:12 AM
I have Z3 and i found this in the log source_client_ip: 192.168.1.113, source_client_mac: 20:4E:F6:CB:15:3D, source_client_assigned_vlan: 0 « hide last_illegal_ip 100.115.92.14 client_total_illegal_packets 558 all_total_illegal_packets 2973 last_reported_total 2963 I am getting this from Chrom box's randomly not sure why and its VLAN 0 !!!!!!!!!!!!!!! i have only one VLAN 1 And whats this IP 100.115.92.14 ? its not even the WAN IP!!! And when i run packet capture nothing is there and the chrom box is set to be DHCP no static
... View more
Jan 14 2021
6:33 AM
@KarstenI Thank you very much again Yes after upgrading my FP1010 i can see the switch port now so i have 2 smart switches connected to port 2 on the FP1010 and each one will be configured with switch port, with the native VLAN, and allowed VLAN Native VLAn 1 Guest wifi VLAN 10 (used by the meraki AP) And then connect the switches to these ports, and connect the Meraki Ap's to the switches with trink port as well and VLANs will work i assumed
... View more
Jan 13 2021
7:53 AM
I am not sure if i get you correctly above is my interfaces I am using Ethernet 1/1, and Ethernet 1/2 as WAN interface And rest of the ports i need to use them to connect my 3 switches as a stunk on VLAN 1 and create DHCP for all the uses, and allow other VLANs and then connect my Meraki MR33 to the switches for the staff SSID will get the VLAN DHCP and Guest ssid will use another VLAN 10 with its own DHCP from the FP 1010 similar to the Meraki If i removed the bridge then i need to configure the same VLAN's on all the ports which is not possible So how can add the all Ethernet ports on one group and start assign VLANs on them simialr to the Mx74 Sorry but this is my 1st experience with FP if you can help will be really appreciated
... View more
Jan 13 2021
5:44 AM
@KarstenI I have the FP1010 now with me The existing setup is Meraki MX64 connected to 3 switches SG350MP, and I have 6 Meraki MR33 connected to the switches and getting the VLAN’s, and DHCP from the Meraki MX64 I need to remove the MX64 and replace it with FP1010 But in FP1010 I can configure Bridge group to connect the 3 switches with same subnet but can’t create VLAN’s on bridge group to support the Meraki AP VLANS, VLAN can be created as subinterface on an interface ! And how to configure the FP1010 as truck ? Thanks in advance
... View more
Dec 18 2020
12:35 PM
@KarstenI Thanks a lot this is very helpful
... View more
Dec 18 2020
8:18 AM
Thanks @KarstenI for the update And i agree with you we will lose the Complete visibility from client to internet Do you connect the Meraki AP directly to the FTP 1010 or to a switch ? So you just created VLAN on the FTP1010 and configure the port to be Truck in order to pass all the Meraki VLANs (staff, and the Guest) ? And then DHCP for the client Any specific tips for the config or its straightforward as i never did a config for FTP devises
... View more
Dec 18 2020
6:51 AM
Yes its AP's using local breakout/bridge mode I have 6 MR33 AP's now connected to MX64, and for some reason we need to replace the Mx64 with Cisco FTP, or Fortigate.
... View more
Dec 18 2020
5:35 AM
HI, I have 6 Meraki AP's connect to a Meraki MX67, but we have to change the MX67 and replace it with Cisco FTP firewall 1010 for some reasons. My question is can we connect Meraki AP to Cisco FTP firewall 1010. If yes can you please share some ideas how ?
... View more
© 2025 Cisco Systems, Inc.
