https://developer.cisco.com/meraki/scanning-api/#!introduction/scanning-api ... View more

We provide a solution for Retail to remove this noise & also to link into Epos to see what they are buying along with recommendation & re marketing. If you want a chat gary@limitlessinsights.com ... View more

We have added MFA to our frontend dashboard so we can limit access by function. We don't share the Meraki dashboard with anyone else ... View more

Fabian, we added internationalisation as part of the splash page & authorisation process @ Limitless  ... View more

CMR Retail are a Cisco Meraki Parner, Developer & retail specialist in Location Analytics if you need a hand we built our platform after using purple and now have a retail solution integrated with Epos capturing Audience Analytics linked back into digital screens & coupons & without the additional costs of DNA spaces ... View more

@Limitless : For RTLS, Meraki only support AeroScout and Ekahau formatted RTLS Tags, see below link https://community.meraki.com/t5/Developers-APIs/Meraki-compatible-RFID-tags/td-p/4485     ... View more

Brandon, we already use the MV API's so no biggy here for us.  It would be much easier to record the random MAC addresses and allow tech companies to sort this out themselves as we do. Our real opportunity is to serve up offers and suggestions based on location & previous purchasing history. With cameras we cant communicate with the customer, we cant detect abandoned baskets and we cant recommend new products but hey ho we'll get over it. ... View more

Will do that   ... View more

Thank you. I have 'Cisco Identity Services Engine (ISE) Authentication' ticked under splash page and everything worked perfectly till today...   ... View more

I hear you but when we had a problem with location I got my usual case closed reply.  Mist surveyed the site plan, advised where they would place AP's to achieve location below 2.0m and replaced the Meraki for mist.  On 4 occasions we have had issues with the location. Our AP's where located as per the meraki standard and we aren't even within 20m in the raw data. Sent reports with data from our data scientists and they still responded with case closed.  Mist can achieve it and its only an integration so you can offer customers both depending on needs. Could honestly say have had no support or engagement in almost three years of building and selling a retail platform built on Meraki ... View more

Hi @Limitless    I am sorry for your experience. Just to get some clarity over this issue, Did you able to open a case with Cisco Meraki support regarding this issue and received no response except the case closure? Can you please follow up on the case and re-open it? (You can do this by simply replying to the email you received from support). This might have happened by mistake, generally, our support team is very responsive and communicative. Also, please feel free to give the support team a call to discuss further (You can find the support hotline number on the dashboard under help > get help)   Cheers!   Raj ... View more

We are working with a large Retailer & we are uploading 15,000 floor plans.  They are a Meraki customer.  We are then using ML to mark up the store categories on top of these plans as geo fences.  This will be ongoing and may lead to big brands moving back to Meraki from Mist systems to utilize the Limitless platform.  This will be ongoing for most clients with more than 100 stores. ... View more

For phones or Cell iPads, just put a SIM card without PIN into the device and it will talk to Meraki ... View more

is there any other obvious reasons why we would jump from 35,000 to 85,000 users then. Definitely not on physical site ... View more

We do this on our Platform and we also provide travel path by Gender & Socio-Economic Class ... View more

I think about 150 - 200 mainly texas instruments or Bluetooth payment terminals all on the same network wide but could remove from all Shopping Center's & Retail stores. ... View more

I'm not 100% sure what you mean by raw data, I'm assuming you mean when you look at clients in the dashboard it reports dB?   What I meant is modifying the minimum basic rate (MBR) aka Minimum bitrate, I personally start at 24Mbps but sometimes I look at increasing it. It will hopefully help with reducing people staying connected while they move away from the associated AP.   The MBR can be set on each SSID by going to Wireless | Configure | Access Control | Wireless options (it's at the bottom). Slide the bar to adjust the rate. Note it can be set using the RF Profiles but I personally like to do it per SSIDs (occasionally I come across a scenario where I need different MBRs for different SSIDs - usually when supporting VoIP).     Also, what do you have band selection (also under Wireless options)? Unless you can disable 2.4GHz, which being a Mall you probably can't, you'd probably want to make sure you're using band steering.   What power levels are the APs set at?   40 APs sounds like a lot, how big is this Mall? Using 2.4GHz will most likely give you a lot of co-channel interference (CCI). You'll also want to make sure your channel widths on 5GHz are narrow, i.e. 20MHz. ... View more

@Limitlesswrote: To get to this accuracy of detail you probably need to move on to an app that has integrated with planogram software If the system gets me walking down the correct side of the aisle, I guess a local beacon could guide one to the exact location (like ILS taking over from ATC).   Recently I was seriously surprised by how well tailored to my tastes the suggestions were, things I was likely to buy that I hadn't noticed previously.   By way of corollary,  I was concerned that my search of academic papers resulted in my being presented with a very tailored selection of advertising from highly specialist suppliers, whilst reading the daily newspaper online. This raises IP concerns. The pharma industry is already having to address this issue. You would be amazed how much is being patented and trademarked in Buenos Aires and Astana. ... View more