Meraki

alemabrahao · ‎Mar 29 2022

What type of device are you trying to get this information?

alemabrahao · ‎Mar 29 2022

What MX version do you have installed?

alemabrahao · ‎Mar 29 2022

Can you share a screenshot? Are you talking about the same organization?

alemabrahao · ‎Mar 29 2022

Maybe this article can help. https://documentation.meraki.com/?title=MX/Other_Topics/IPv6_Support_on_MX_Security_%26_SD-WAN_Platforms_%255BCore_Fundamentals%255D

alemabrahao · ‎Mar 28 2022

No, Does your MX support AnyConnect?

alemabrahao · ‎Mar 28 2022

I think It's not possible, maybe with an MDM solution, but I'm not sure.

alemabrahao · ‎Mar 28 2022

I don't know If they have a calculator to calculate that, but you can check the BSSID MAC on "BSSID Details":

alemabrahao · ‎Mar 28 2022

Hi @Derek_L , Do want to know how many SSIDs you can create? Well, Cisco recommends a maximum of 4 SSIDs. You can calculate the overhead using this calculator: https://wlanprofessionals.com/wifi-ssid-overhead-calculator/

alemabrahao · ‎Mar 28 2022

The MX Lan ports are configured as a Trunk or Access? If it is configured as a trunk, try to change Native Vlan to (drop untagged traffic).

alemabrahao · ‎Mar 28 2022

Is STP enabled on switches?

alemabrahao · ‎Mar 28 2022

Maybe it's flapped and they're both trying to take over as master. You can check Warm Spare Design on this link: https://www.willette.works/mx-warm-spare/

alemabrahao · ‎Mar 28 2022

Well, It looks like a MX issue. What version are you running?

alemabrahao · ‎Mar 28 2022

Is the MX in Warm Spare? Did you notice any spanning-tree events on the switch?

alemabrahao · ‎Mar 26 2022

Yep, It has been working fine. 🙂

alemabrahao · ‎Mar 25 2022

@MakaraMEAS the ACL on Cisco ISE and Group Policy on Meraki Dashboard has to have the same name. https://community.cisco.com/t5/security-documents/how-to-integrate-meraki-networks-with-ise/ta-p/3618650#:~:text=the%20MAB%20SSID.-,Configure%20Meraki%20Wireless%20Group%20Policy,Name%20the%20group%20policy%20Employee.

alemabrahao · ‎Mar 25 2022

Version 28.6 is a Stable release candidate yet, I think It can be a bug. Maybe you can try to downgrade to another version.

alemabrahao · ‎Mar 25 2022

What is the minimum bitrate set on your profile? Have you checked the RF spectrum?

alemabrahao · ‎Mar 25 2022

EAPoL timeout indicates an 802.1X issue. I don't think that is your case correct? Have you tried to update your NIC driver?

alemabrahao · ‎Mar 25 2022

Check this link, I think It can be helpful 🙂 https://community.meraki.com/t5/Security-SD-WAN/UPnP-Help/m-p/10861

alemabrahao · ‎Mar 25 2022

HI, It is not possible to do, but I think a good way should be to export the configurations using APIs and then import them. Take a look at this link https://github.com/meraki/automation-scripts

alemabrahao · ‎Mar 25 2022

Try to check these informations: https://documentation.meraki.com/MX/Client_VPN/Guided_Client_VPN_Troubleshooting#Windows_Error_720

alemabrahao · ‎Mar 24 2022

Hi Check this link https://github.com/CiscoDevNet/meraki-network-vlan-provision

alemabrahao · ‎Mar 24 2022

The switch core in that case.😅

alemabrahao · ‎Mar 24 2022

Yes, but he didn't say the switch model, just he needs to isolate inter-Vlan communication. I know that Meraki Switches do not have VRFs. But to diced what is the best scenario, we need to know the topology, don't you think?

alemabrahao · ‎Mar 24 2022

Yes, but you can set the firewall as a gateway for guest VLANs, there are many possibilities. You can use VRFs on switch core for example. 🙂

About alemabrahao

alemabrahao

Alessandro Abrahao

Community Record

Badges