Meraki

alemabrahao · ‎Apr 4 2022

Well, in my opinion, it's a way for you to route traffic to machines that you have on Azure without having to create a VPN tunnel for each branch. You can concentrate all routing on the hub and branches would have routes via SD-WAN. Of course, this is in case you don't want to publish these servers to the internet.

alemabrahao · ‎Apr 4 2022

Check this link: https://documentation.meraki.com/MX/MX_Installation_Guides/vMX_Setup_Guide_for_Microsoft_Azure

alemabrahao · ‎Apr 4 2022

https://meraki.cisco.com/ja-jp/product/security-cameras/outdoor-security-cameras/mv72x/

alemabrahao · ‎Apr 4 2022

Hi @FlyingFrames , The document says of up to 8 SSIDs, but generally, not more than 3 SSIDs are recommended. https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Multi-SSID_Deployment_Considerations

alemabrahao · ‎Apr 4 2022

Did you follow this link: https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Facebook_Login?fbclid=IwAR3nUBrGTzKp91XAcnB3P5S78yyKKcjWqsmqgzvNpZoMZ6pICubZ_ORfBkI Have you checked the configuration on the Facebook page?

alemabrahao · ‎Apr 4 2022

@Djsky123 can you share the error screenshot?

alemabrahao · ‎Apr 4 2022

For a wireless device, you can assign a group policy by device type. And just allow clients that do you want to use the wireless on a different group policy. I have never tested It before, but I can test and share the results.

alemabrahao · ‎Apr 4 2022

To use MAB on wireless a Radius server is required. To use on the LAN segment you can use a allow list on each port:

alemabrahao · ‎Apr 4 2022

Do you want to enable MAB on Wireless?

alemabrahao · ‎Apr 4 2022

by the way, I noticed that the client Is receiving RSSI 100, It means that there is not a good signal. https://www.metageek.com/training/resources/understanding-rssi/

alemabrahao · ‎Apr 4 2022

Try to change the Radius timeout on your SSIDs, by default It's 1 second, and change it for 10.

alemabrahao · ‎Apr 4 2022

@Elopez did you do a configuration that I recommended?

alemabrahao · ‎Apr 4 2022

@mjenks I don't know what type of devices are you testing, but Have you checked the firewall on the device? Have you performed a packet capture?

alemabrahao · ‎Apr 3 2022

alemabrahao · ‎Apr 2 2022

I personally am still trying to find a use for this functionality. In my opinion there are other more interesting features that could not be implemented. 😅

alemabrahao · ‎Apr 2 2022

Check this link: https://documentation.meraki.com/?title=MX%2FOther_Topics%2FIPv6_Support_on_MX_Security_%26_SD-WAN_Platforms_%255BCore_Fundamentals%255D#Feature_set

alemabrahao · ‎Apr 2 2022

And the commended VPN client tunnel is 250 user simultaneous

alemabrahao · ‎Apr 2 2022

@MakaraMEAS can you share the configuration, please?

alemabrahao · ‎Apr 2 2022

MX 105 is recommended for mid to large enterprise locations with 750 users simultaneous including VPN clients.

alemabrahao · ‎Apr 1 2022

Your preferred link is configured for the WAN 1 🤔 How is configured your uplink configuration and uplink selection? Take a look at those examples:

alemabrahao · ‎Apr 1 2022

Try this:

alemabrahao · ‎Apr 1 2022

You can try to increase de EAP timers and also disable Radius CoA: Can you share your RF profile configuration?

alemabrahao · ‎Apr 1 2022

Do you have a lock at the bottom left of the Network pane? If there’s a lock at the bottom left of the Network pane, click it to unlock the preference pane.

alemabrahao · ‎Apr 1 2022

Ok, but It's a native client on macOS, you should have to open a ticket with Apple.

alemabrahao · ‎Apr 1 2022

Have you checked this link? https://documentation.meraki.com/MX/Client_VPN/Client_VPN_OS_Configuration#macOS

About alemabrahao

alemabrahao

Alessandro Abrahao

Community Record

Badges