Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
- About Darian
Darian
Here to help
Member since Sep 19, 2020
11-03-2021
Community Record
16
Posts
0
Kudos
0
Solutions
Badges
09-02-2021
01:02 PM
Thank you for looking but the document says it is only intended for auto-vpn and not for non-meraki peers which is what our vendor has (we believe a fortinet)
... View more
09-02-2021
09:46 AM
Hello, We have a vendor that will be using our site-site so that they can use our Public IP to access whitelisted sites. Is there anyway to make it so traffic coming from that VPN goes to a specific public IP on our MX? Kinda like 1:1 NAT but for a VPN connection.
... View more
08-26-2021
11:55 AM
We are trying to make it so when trying to add a printer it auto-discovers the printer and they can click it to connect rather than putting in an IP address and finding the correct driver. When trying to do this it shows the shared printers from our domain controller but nothing else. Has anyone ran into this issue before, I even went into L3 and setup the top 2 rules to allow communication between our Printer VLAN and everything else and has not fixed it either. We can connect via IP address and it will work but we are trying to make it so users can add it automatically when roaming from campus to campus. This is the same on both Windows and macOS
... View more
Labels:
- Labels:
-
Other
08-20-2021
02:42 PM
Thank you, I'm going to try the ipsk without radius for Meraki (they don't have a on-site server) and see how that goes!
... View more
08-20-2021
12:45 PM
A client of ours wants to setup multiple SSID's for each of their 'teams' and separate them using VLANs and L3 firewall rules. We are trying to talk them out of this and just doing 3 SSID's a guest, private, and a team making those teams connect to the "Team" SSID and making it so none of the devices can communicate with each other. We know you can accomplish this by using the meraki DHCP but they also have a network printer that those devices will also need to connect to on another VLAN. Is it possible to make it so they can communicate to the printer vlan but not to other devices on the "team" vlan? For example: I have a laptop on the "Team" SSID using VLAN 2 and need to print to a printer on VLAN 1. However, I should not be able to setup a network share or ping from my laptop to my desktop if both the devices are on the same "Team" SSID.
... View more
06-28-2021
09:38 AM
Gotcha, thank you for your help. As far as Jamf goes do you like that more than SM does it offer more functionality?
... View more
06-25-2021
10:17 AM
Gotcha, have you used it with the newest Big Sur or Catalina update by chance? These are the ones we are having issues with
... View more
06-23-2021
01:59 PM
Has anyone successfully installed the MacOS MDM agent on a computer though any kind of RMM software silently (no user interface)? Or is this even possible given apples OS it seems like they really don't want you to do it at all unless you use their MDM.
... View more
Labels:
- Labels:
-
Enrollment
-
macOS
05-19-2021
10:31 AM
That looks promising, but looks like we need beta firmware to do it, do you know if there is any other way to do this until it's come out fully? It won't let me enable the Beta in network wide settings says it's not compatible.
... View more
05-19-2021
08:36 AM
Is it possible to setup the mac allow list to have the MAC address for an MR33 but still be allowed to have wireless clients connect to it and get intranet and internet access? Our main issue here is for it to work correctly it would seem we have to have the port set to trunk and allow all VLAN's that have an SSID tied to it. The access point is plugged into a normal wall jack due to our renters not allowing us to run new cables so we don't want people unplugging it and using something else when the ports are wide open and allowed access to everything.
... View more
04-09-2021
08:59 AM
After looking a little harder, I was able to find where to input the subnet for azure so it knows where and what is allowed to pass traffic. I assumed you had to add it into the site-site / Azure IP information but you have to add it into the "remote WAN" section to work. Thank you for the help guys!
... View more
04-06-2021
04:58 PM
Hello everyone, We have a client that has their main HQ that remote users connect to via client VPN and they also have a site-to-site azure connection to the HQ that has a file server. The issue here is when a user connects to client VPN they cannot reach the azure file server, I did check and confirmed that the "Client VPN" subnet is allowed to communicate over the site-to-site connection. I also confirmed that I can ping it from a computer that is on the same network as the HQ Meraki. Anyone have any ideas here?
... View more
03-08-2021
08:21 AM
Awesome thank you for letting me know, were doing some testing now and things are looking promising!
... View more
03-03-2021
12:42 PM
So in the add devices section it shows you need to create a windows profile than download the agent, do we have to do a windows profile or can we just install the agent and it works?
... View more
03-03-2021
12:20 PM
Has anyone successfully added meraki MDM using an RMM software, we use NinjaRMM and would like to silently install and add all our workforce computers with as little interaction with the end user as possible. What does Meraki MDM actually require in order to work properly mainly geo tracking and application policies.
... View more
Labels:
- Labels:
-
Enrollment
