Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About RJAC
RJAC
Here to help
Member since Jul 13, 2020
3 weeks ago
Community Record
9
Posts
2
Kudos
1
Solution
Badges
Jul 20 2020
3:29 AM
Hi @MinnesotaKid with regards to 10.128.128.128 IP that only appears when splash page settings is set to Cisco ISE once we point to none (direct access) the path changes and 10.128.128.128 was out of the picture. its a bit strange, though because that tells us that 10.128.128.128 is somehow caused by ISE but on our end were certaiun that its not our ISE thank you Rajesh
... View more
Jul 20 2020
3:26 AM
Hi @MinnesotaKid the problematic version of ISE on our end is version 2.6.0.156 patch 2,6 and we end up rolling it back to version 2.6.0.156 patch 2. that seems to resolve the issue for us 🙂 Cheers RJAC
... View more
Hi UCcert /Everyone further troubleshooting results that its an issue on our ISE. when we change the splash page settings to None (direct access), users were able to browse the internet and the 10.128.128.128 ip was cleared. 1st hop was the ISP public ip. thank you for all of the suggestions and help RJAC
... View more
Jul 14 2020
1:22 AM
Hi Uccer/Everyone ping from core router sourcing svi of guest wifi can reach the internet wired connection can reach the internet as well when we connect to other ssid we can reach the internet as well the issue is just happening on guest wifi ssid. (1st hop is 10.128.128.128) thank you RJAC
... View more
Jul 13 2020
11:17 PM
Hi WW/Everyone ISE is only for authentication, we checked the logs on ISE and users are authenticated its just that once they are associated with the guest wifi theres no internet access thank you RJAC
... View more
Jul 13 2020
7:05 AM
Hi Coesione_srl All of the AP's were able to connect to the internet via ping and traceroute. and we have 10 acl rules in place but i can only show the last 2 acl rules. please see below the 1st 8 acl rules is just to allow traffic from our ISE servers. thank you RJAC
... View more
Jul 13 2020
1:00 AM
Hello Ww/Everyone Yes theirs fw rules configured on meraki (wireless environment) is there any specific rules we need to allow or deny? it was also working before and the issue started to occur recently. by the way Addressing and traffic settings is set to bridge mode and no change was made on the meraki
... View more
Jul 13 2020
12:35 AM
Hello Everyone Where having this issue where in once a client/user is connected to our guest wifi ssid they cannot get internet access. ipconfig details of the client is correct its just that once we ran a traceroute the 1st hop is 10.128.128.128 and were certain that IP address (10.128.128.128) is not within our network. Other SSID's are working fine. Meraki details MR55 Current version: MR 26.4 Thanks RJAC
... View more
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 17734 | Jul 20 2020 3:29 AM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 2 | 17833 |
© 2025 Cisco Systems, Inc.
